Mô đun ABB AC800M I/O Module CI865 MODBUS TCP CI867K01 3BSE043660R1 CEX-Bus logic
ABB AC800M I/O Module CI865 MODBUS TCP CI867K01 3BSE043660R1 CEX-Bus logic
Description of CI867K01
MODBUS TCP is an open industry standard widely spread due to its ease of use. It is a request response protocol and offers services specified by function codes.
MODBUS TCP combines the MODBUS RTU with standard Ethernet and universal networking standard TCP. It is an application-layer messaging protocol, positioned at level 7 of the OSI model. The CI867/TP867 is used for connection between an AC 800M controller and external Ethernet devices using Modbus TCP protocol.
The CI867 expansion unit contains the CEX-Bus logic, a communication unit and a DC/DC converter that supplies appropriate voltages from the +24 V supply via the CEX-Bus. The Ethernet cable must be connected to the main network through an Ethernet switch.
Communications
| Model No. | Protocol | Master or slave |
| CI801 | PROFIBUS DP-V1 | Slave |
| CI840A | PROFIBUS DP-V1 | Slave |
| CI853 | COMLI and MODBUS RTU | Master / Slave |
| CI854B | PROFIBUS DP-V1 | Master |
| CI855 | ABB’s MasterBus 300 | Master |
| CI856 | ABB’s S100 I/O | Master |
| CI857 | ABB’s INSUM | Master |
| CI858 | ABB’s DriveBus | Master |
| CI860 | FOUNDATION Fieldbus HSE | Master / Slave |
| CI865 | ABB’s Satt I/O | Master |
| CI867 | MODBUS TCP | Master / Slave |
| CI868 | IEC 61850 | Master / Slave |
| CI869 | ABB’s Advant Fieldbus 100 | Slave |
| CI871 | PROFINET IO | Master |
| CI873 | EtherNet IP / DeviceNet | Master |
| TB820V2 | ABB’s Modulebus | Slave |
| TB825 (Multi Mode) | ABB’s Modulebus | Slave |
| TB826 (Single Mode) | ABB’s Modulebus | Slave |
| TB840A | ABB’s Modulebus | Slave |
| TB842 | ABB’s Modulebus | Not Applicable |
| TU807 | ABB’s Modulebus | Not Applicable |
| TU840 | ABB’s Modulebus | Not Applicable |
| TU841 | ABB’s Modulebus | Not Applicable |
| TU846 | ABB’s Modulebus | Not Applicable |
| TU847 | ABB’s Modulebus | Not Applicable |
| TU848 | ABB’s Modulebus | Not Applicable |
| TU849 | ABB’s Modulebus | Not Applicable |
General Information
| Protocol | MODBUS TCP |
| Article number | 3BSE043660R1 |
| Master or slave | Master / Slave |
| Transmission speed | 10/100 Mbit/s (Ch1), 10 Mbit/s (Ch2) |
| Line redundancy | No |
| Module redundancy | Yes |
| Hot Swap | Yes |
| Used together with HI Controller | Yes |
Detailed data
| Max units on CEX bus | 12 |
| Connector | RJ-45 female (8-pin) |
| 24 V consumption typ. | typ 160 mA |
Environmental and certification
| Temperature, Operating | 55 °C |
| Protection class | IP20 according to EN60529, IEC 529 |
| CE- marking | Yes |
| Marine certificates | ABS, BV, DNV-GL, LR |
| RoHS compliance | EN 50581:2012 |
| WEEE compliance | DIRECTIVE/2012/19/EU |
Features and benefits
- The CI867 can be set redundant and supports hot swap.
- CI867 is a dual channel Ethernet unit; Ch1 supports full duplex with 100 Mbps speed and Ch2 supports half duplex with 10 Mbps speed. Both master and slave functionality are supported.
- A maximum of 70 slave and 8 master units per CI867 (on Ch1 and Ch2 together) can be used.
Dimensions
| Height | 185 mm (7.3 in.) |
| Width | 59 mm (2.3 in.) |
| Depth | 127.5 mm (5.0 in.) |
| Weight (including base) | 700 g (1.5 lbs) |
Some ABB items sold by WTL:
WTL is not liable for any personal injury or property damage resulting from the use of this equipment. It is
buyer’s responsibility as to the safe handling & operation of this equipment and to verify equipment is
compliance to their machinery.
Our Brands:
| 【Honeywell】 | Module DCS/PLC/Transmitter |
| 【Emerson/Delta V】 | Module/ CT Motor & Drives |
| 【ABB】 | I/O Module |
| 【AB】 | Module&Touch Screen |
| 【Rosemount】 | Transmitter |
| 【Yokogawa】 | Transmitter |
| 【Yaskawa】 | Servo Drive&Servo Motor |
| 【GE/Fanuc】 | IC69 Series PLC |
| 【Mitsubishi】 | Servo Drive&Servo Motor |
(Modicon,SMC,SICK,NORGREN,Siemens,Ebmpapst etc.)
