Bộ điều khiển Omron Photoelectric Switch Sensors EE-SX670-WR Grooved Type

đại lý EE-SX670-WR | nhà phân phối EE-SX670-WR

Quick details:

Type	Grooved Type (Standard)
nous method	Non-modulated
Sensing method	Through-beam type
Sensing distance	5 mm (slot width)
Operation mode	Dark-ON/Light-ON (selectable)
Standard sensing object	Opaque object (2 x 0.8 mm min.)
Differential distance elements	0.025 mm max.
Light source (Peak wavelength)	Infrared LED (940 nm)
Indicator	Light indicator (red)
Power supply voltage	5 to 24 VDC ±10% (ripple (p-p)10% max.)
Current consumption	35 mA max.
Control output (Output type)	NPN Open collector output
Control output (Load power supply voltage)	5 to 24 VDC
Control output (Load current)	100 mA max.
Control output (Residual voltage)	0.8 V max. (at 100 mA load current) 0.4 V max. (at 40 mA load current)
Response frequency elements	1 kHz min. (average 3 kHz) (See “Measurement condition of Response frequency elements”)
Illumination on the surface receiver	Fluorescent light: 1000 lx max.
Ambient temperature	Operating: -25 to 55 ℃ Storage: -30 to 80 ℃ (with no icing or condensation)
Ambient humidity	Operating: 5 to 85% RH Storage: 5 to 95% RH (with no icing or condensation)
Vibration resistance	20 to 2000 Hz, peak acceleration 100 m/s**2, 1.5-mm double amplitude 2 h each in X, Y, and Z directions (4 min periods)
Shock resistance	500 m/s**2, 3 times each in X, Y, and Z directions
Degree of protection (IEC60529)	IP50
Connection method	Pre-wired models
Cable length	1 m
Material	Case: Polybutylene phthalate (PBT) Emitter/Receiver Cover: Polycarbonate(PC)