Mô đun NEW ABB AC800M Controller PM856AK01 3BSE066490R1 CPU board I/O Module
NEW ABB AC800M Controller PM856AK01 3BSE066490R1 CPU board I/O Module
Description of PM856AK01
The CPU board contains the microprocessor and RAM memory, a real-time clock, LED indicators, INIT push button, and a CompactFlash interface.
The base plate of the PM856A controller has two RJ45 Ethernet ports (CN1, CN2) for connection to the Control Network, and two RJ45 serial ports (COM3, COM4). One of the serial ports (COM3) is an RS-232C port with modem control signals, whereas the other port (COM4) is isolated and used for the connection of a configuration tool.
Simple DIN rail attachment / detachment procedures, using the unique slide & lock mechanism. All base plates are provided with a unique Ethernet address which provides every CPU with a hardware identity. The address can be found on the Ethernet address label attached to the TP830 base plate.
General Information
| Article number | 3BSE066490R1 (PM856AK01) |
| Redundancy | No |
| High Integrity | No |
| Clock Frequency | 24 MHz |
| Performance, 1000 boolean operations | 0.46 ms |
| Performance | 0.46 ms |
| Memory | 16 MB (from 800xA 5.1 FP4) |
| RAM available for application | 10.337 MB (from 800xA 5.1 FP4) |
| Flash memory for storage | Yes |
Detailed data
| Processor type | MPC860 |
| Switch over time in red. conf. | NA |
| No. of applications per controller | 32 |
| No. of programs per application | 64 |
| No. of diagrams per application | 128 |
| No. of tasks per controller | 32 |
| Number of different cycle times | 32 |
| Cycle time per application programs | Down to 1 ms |
| Flash PROM for firmware storage | 2MB |
| Power supply | 24 V d.c. (19.2-30 V d.c.) |
| Power consumption +24 V typ/max | 180 / 300 mA |
| Power dissipation typ. | 4.32 W (7.2 W max) |
| Redundant power supply status input | Yes |
| Built-in back-up battery | Lithium, 3.6 V |
| Real-time clock stability | 100 ppm (approx. 1 h/year) |
| Clock synchronization | 1 ms between AC 800M controllers by CNCP protocol |
| Event queue in controller per OPC client | Up to 3000 events |
| AC 800M transm. speed to OPC server | 36-86 events/sec ,113-143 data messages/sec |
| Comm. modules on CEX bus | 12 |
| Supply current on CEX bus | Max 2.4 A |
| I/O clusters on Modulebus with non-red. CPU | 1 electrical, 7 optical |
| I/O clusters on Modulebus with red. CPU | NA |
| I/O capacity on Modulebus | Max 96 I/O modules |
| Modulebus scan rate | 0 – 100 ms (actual time depending on number of I/O modules) |
| Supply current on Electrical Modulebus | 24 V : max 1.0 A 5 V : max 1.5 A |
| Ethernet channels | 2 |
| Ethernet interface | Ethernet (IEEE 802.3), 10 Mbit/s, RJ-45, female (8-pole) |
| Control Network protocol | MMS (Manufacturing Message Service) and IAC (Inter Application Communication) |
| Recommended Control Network backbone | 100 Mbit/s switched Ethernet |
| RS-232C interface | 2 (one general, 1 for service tool) |
| RS-232C interface (COM3) (non red. only) | RS-232C, 75-19 200 baud, RJ-45 female (8-pole), not opto isolated, full RTS-CTS support |
| RS-232C interface (COM4) (non red. only) | RS-232C, 9 600 baud, RJ-45 female (8-pole), opto isolated, no RTS-CTS support |
Controllers
| BC810K02 | BC820K02 | PM851AK01 |
| PM858K02 | PM860AK01 | PM862K01 |
| PM865K02 | SM811 (for PM865) | PM866AK01 |
| PM856AK01 | PM858K01 | PM862K02 |
| PM865K01 | PM866AK02 | PM867K01 |
| SM812 (for PM867) | PM891K01 | PM891K02 |
Environmental and certification
| Temperature, Operating | +5 to +55 °C (+41 to +131 °F) |
| Temperature, Storage | -40 to +70 °C (-40 to +158 °F) |
| Temperature changes | 3 °C/minutes according to IEC/EN 61131-2 |
| Altitude | 2000 m (6 562 ft) according to IEC/EN 61131-2 |
| Pollution degree | Degree 2 according to IEC/EN 61131-2 |
| Corrosion protection | G3 compliant to ISA 71.04 |
| Relative humidity | 5 to 95 %, non-condensing |
| Emitted noise | < 55 dB (A) |
| Vibration | 10 < f < 50 Hz: 0.0375 mm amplitude, 50 < f < 150 Hz: 0.5 g acceleration, 5 < f < 500 Hz: 0.2 g acceleration |
| Rated Isolation Voltage | 500 V a.c. |
| Dielectric test voltage | 50 V |
| Protection class | IP20 according to EN 60529, IEC 529 |
| Emission & Immunity | EN 61000-6-4, EN 61000-6-2 |
| Environmental conditions | Industrial |
| CE- marking | Yes |
| Electrical Safety | EN 50178, IEC 61131-2, UL 508 |
| Hazardous location | cULus Class 1, Zone 2, AEx nA IIC T4, ExnA IIC T4Gc X |
| Marine certificates | ABS, BV, DNV-GL, LR, RS |
| TUV Approval | No |
| RoHS compliance | EN 50581:2012 |
| WEEE compliance | DIRECTIVE/2012/19/EU |
Features and benefits
- Reliability and simple fault diagnosis procedures
- Modularity, allowing for step-by-step expansion
- IP20 Class protection without the requirement for enclosures
- The controller can be configured with 800xA control builder
- The controller has full EMC certification
- Hardware based on standards for optimum communication connectivity (Ethernet, PROFIBUS DP, etc.)
Dimensions
| Height | 186 mm (7.3 in.) |
| Width | 119 mm (4.7 in.) |
| Depth | 135 mm (5.3 in.) |
| Weight | 1100 g (2.4 lbs) |
Some ABB items sold by WTL:
WTL is not liable for any personal injury or property damage resulting from the use of this equipment. It is
buyer’s responsibility as to the safe handling & operation of this equipment and to verify equipment is
compliance to their machinery.
Our Brands:
| 【Honeywell】 | Module DCS/PLC/Transmitter |
| 【Emerson/Delta V】 | Module/ CT Motor & Drives |
| 【ABB】 | I/O Module |
| 【AB】 | Module&Touch Screen |
| 【Rosemount】 | Transmitter |
| 【Yokogawa】 | Transmitter |
| 【Yaskawa】 | Servo Drive&Servo Motor |
| 【GE/Fanuc】 | IC69 Series PLC |
| 【Mitsubishi】 | Servo Drive&Servo Motor |
(Modicon,SMC,SICK,NORGREN,Siemens,Ebmpapst etc.)
