GE FANUC SERIES 90-30 PLC Digital I/O Module IC693CPU331 FACTORY SEALED
 
 
 
 
Product Description:
 
GE Fanuc Discrete input module for 90 – 30 series PLC offers 16 input points with one common power input terminal. It requires an AC power source for convenient operation. Module has LED indicators at the top to offer ON/OFF status of each point. Module has circuit wiring information on the surface towards the inside and circuit identification information on the outside surface. Module has a voltage rating of 120 VAC at 50/60 Hz, 0 – 132 VAC at 50/60 Hz, input current rating of 12 milli-Amps and a power rating of 90 milli-Amps at 5 VDC. It has a maximum ON response time of 30 milli-seconds and maximum OFF response time of 45 milli-seconds. Module is compatible with input devices such as pushbuttons, limit switches and electronic proximity switches. Input/output module provides the interface between the PLC and external input devices such as proximity sensors, push buttons, switches and BCD thumbwheels. It supports different voltage ranges, types, current capacity, isolation and response time to meet your application.
 
 
 
 
Product Details:
 
Input modules provide the interface between the PLC and external input devices such as proximity sensors, push buttons, switches and BCD thumbwheels. Output modules provide the interface between the PLC and external output devices such as contactors, interposing relays, BCD displays and indicator lamps. This module requires an AC power source, it cannot be used with a DC power source.
 
 

 

 

 

 

Product Summary:

 

• CPU Type: Single slot CPU module

• Load Required from Power Supply: 350 milliamps from +5 VDC supply

• Processor Speed: 10 MegaHertz

• User Program Memory (maximum): 16K Bytes

• Timers/Counters: 680

 

 

 

 

 

 

• Description: CPU Module

• Shift Registers: Yes

• Override: Yes

• Battery Backed Clock: Yes

• Interrupts: No

• PCM/CCM Compatibility: Yes

• Type of Memory Storage: RAM and optional EPROM or EEPROM

• Built-in Ports: 1 (uses connector on PLC power supply). Supports SNP/SNP-X slave protocols. Requires CMM module for SNP/SNP-X master, CCM, or RTU slave support; PCM module for RTU master support.

 

 

 

 

• Type of Device: CPU 331 Module, (16 Kbytes User Program Memory)

• CPU Type: Single slot CPU module

• Total Baseplates per System: 5 (1 CPU baseplate + 4 expansion and/or remote)

• Load Required from Power Supply: 350 milliamps from +5 VDC supply

• Processor Speed: 10 MegaHertz

• Operating Temperature: 0 to 60 degrees C (32 to 140 degrees F) ambient

• Typical Scan Rate: 0.4 milliseconds per 1K of logic (boolean contacts)

• User Program Memory (maximum): 16K Bytes

• Timers/Counters: 680