Mô đun GE FANUC SERIES 90-30 PLC Digital I/O Module IC693ALG442 FACTORY SEALED
đại lý IC693ALG442 | nhà phân phối IC693ALG442
GE FANUC SERIES 90-30 PLC Digital I/O Module IC693ALG442 FACTORY SEALED
Product Description:
GE Fanuc Discrete input module for 90 – 30 series PLC offers 16 input points with one common power input terminal. It requires an AC power source for convenient operation. Module has LED indicators at the top to offer ON/OFF status of each point. Module has circuit wiring information on the surface towards the inside and circuit identification information on the outside surface. Module has a voltage rating of 120 VAC at 50/60 Hz, 0 – 132 VAC at 50/60 Hz, input current rating of 12 milli-Amps and a power rating of 90 milli-Amps at 5 VDC. It has a maximum ON response time of 30 milli-seconds and maximum OFF response time of 45 milli-seconds. Module is compatible with input devices such as pushbuttons, limit switches and electronic proximity switches. Input/output module provides the interface between the PLC and external input devices such as proximity sensors, push buttons, switches and BCD thumbwheels. It supports different voltage ranges, types, current capacity, isolation and response time to meet your application.
Product Details:
Input modules provide the interface between the PLC and external input devices such as proximity sensors, push buttons, switches and BCD thumbwheels. Output modules provide the interface between the PLC and external output devices such as contactors, interposing relays, BCD displays and indicator lamps. This module requires an AC power source, it cannot be used with a DC power source.
Product Summary:
-
Type of Device: Input / Output Analog, Current / Voltage
-
External Supply Voltage Range: 20 to 30 VDC (24 VDC typical)
-
Voltage Ripple: 10%
-
Update Rate: Update Rate: 3 ms
-
Analog Outputs: Two, Single?Ended
-
Description: Analog I/O Module | Series 90-30
-
Number of Input Channels: 4 differential
-
Input Ranges: 0 to 20 mA / 4 to 20 mA / 4 to 20 mA Enhanced
-
Resolution 0 to +10V: 2.5 mV (1 LSB = 2.5 mV)
-
Resolution -10 to +10V: 5 mV (1 LSB = 5 mV)
-
Input Filter Response: 29 Hz
-
Current Consumption From Internal +5V Supply: 95 mA
-
Current Consumption From External User Supply: 129 mA
-
Product Description: Outputs can be configured to either Hold Last State or to reset to the low end of their range if system power is interrupted. Outputs can also be configured to operate in ramp mode on command from the application program. In ramp mode, the output channel transitions to a new value over a period of time, rather than taking the new value immediately. High and low alarm limits can be set for all input channels and an open-wire fault (current output modes) can be reported to the CPU for each output channel. ALG442 modules in RX3i racks support firmware upgrades in the field.
-
Type of Device: Input / Output Analog, Current / Voltage
-
External Supply Voltage Range: 20 to 30 VDC (24 VDC typical)
-
Voltage Ripple: 10%
-
Power Consumption: 95 mA from internal +5 VDC Supply, 150 mA from external +24 VDC supply
-
Update Rate: Update Rate: 3 ms
-
Isolation, Field to Backplane (optical) and to Frame Ground: 250 VAC continuous; 1500 VAC for 1 minute
-
Analog Outputs: Two, Single?Ended
-
Output Ranges: 0 to 20 mA, 4 to 20 mA
-
Output Load Capacitance: 2000 pF (maximum)
-
Output Load Inductance: 1 H (maximum)
Related Product Recommendation:
| GE | VCIB-16A | GE | DS200CDBAG1ACA |
| GE | VMIVME-7671-421000 | GE | DS200DCFBG2BNC |
| GE | 269PLUS-100P-120 | GE | DS200FCRRG1AKD |
| GE | 369-HI-0-0-0-0 | GE | DS200LDCCH1ARA |
| GE | 369-HI-R-0-0-0 | GE | DS200LRPAG1AGF |
| GE | 531X111PSHAPG3 | GE | DS200PCCAG5ACB |
| GE | 531X113PSFARG1 | GE | DS200PCCAG9ACB |
| GE | 531X123PCHACG1 | GE | IC693DSM302 |
| GE | 531X139APMARM7 | GE | IC693MDL330 |
| GE | 531X303MCPBCG1 | GE | IC693MDL646 |
| GE | 531X305NTBACG1 | GE | IC693MDL655 |
| GE | 531X305NTBAPG1 | GE | IC693MDL730 |
| GE | IC200ALG322 | GE | IC693MDL752 |
| GE | IC200ALG620 | GE | IC693PBS105 |
| GE | IC200ALG630 | GE | IC693PCM301 |
| GE | IC200CHS002 | GE | IC200MDL742 |
| GE | IC200MDL740 | GE | IC200CPUE05 |
| GE | IC3600LTGA | GE | IC200PWR101 |
| GE | IC3600TUAA1 | GE | IC200PWR001 |
| GE | IC660BBD025 | GE | IC693PWR330 |
| GE | IC670MDL640 | GE | IC694APU300 |
| GE | IC670PBI001 | GE | IC694BEM331 |
| GE | IC693ACC310 | GE | IC694MDL645 |
| GE | IC693ALG223 | GE | IC694MDL655 |
| GE | IC693ALG390 | GE | IC694MDL740 |
The use of the product:
【Emerson】DeltaV Module / Servo Motor
【ABB】Input Output Module
【AB】Module / Touch Screen
【Rosemount】Pressure and Temperature Transmitter
【Yokogawa】Pressure Transmitter
【Yaskawa】Servo Drive / Servo Motor
【Mitsubishi】Servo Drive / Servo Motor
【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive
