Mô đun GE FANUC IC693MDL653 ， 24-volt DC Positive/Negative Logic Input module
GE FANUC IC693MDL653 , 24-volt DC Positive/Negative Logic Input module
Product Description
IC693MDL653 is a 24-volt DC Positive/Negative Logic Input module for the Series 90-30 Programmable Logic Controllers. It presents 32 input points grouped into four with each group comprising eight points. The four groups consist of two ordinary pins each are knotted together internally. IC693MDL653 has a maximum of 2 milliseconds for the “on” and “off” response periods. The 32-point input module has both positive and negative features.
When linked to a positive logic it drives currents from the input device attached to the positive power and circuit input to the negative bus. The module also gets currents from the input device and transfers them to the positive power bus when conjoined for negative logic. The input features are suitable for many input devices which include; less switches pushbuttons, and electronic proximity switches. The user provides the ability to run the field devices. Most attachments to the input circuits are created from the user’s input devices and using an IC693MDL653 cable together with a 32-point High-Density modules that have a 50-pin Honda connector built on the front of the module.
The GE Fanuc provides prewired cables ending with terminal lugs that contain connectors at one end and wires on the opposite end. IC693MDL653 lack LED indicators for displaying circuit conditions. Further, the module can be set up in an I/O port which has a 5 – 10-slot baseplate in a Series 90-30 PLC system. The module has an Input Current of 7.5 mA (average) at rated voltage. It has input features which entails having an On-state Voltage of 15 volts DC minimum, Off-state Voltage 6 volts DC maximum, On-state Current 4.5 mA minimum and Off-state Current 2 mA maximum. In addition, the highest number of inputs switched on at the same time should be no more than 16.
About IC693MDL653
The IC693MDL653 input controller is part of the programmable logic controller (PLC) system manufactured by GE Fanuc Automation. The IC693MDL653 controller is classified under Series 90-30 of the GE Fanuc PLCs. The IC693MDL653 input controller is built to ensure ease of installation and configuration. Designed with advanced programming features, the IC693MDL653 controller delivers a cost-effective platform for data input applications. Ideally, the GE Fanuc input controller is built to be part of a small PLC that is easy to use and install, and easy to do maintenance work on. The IC693MDL653 input controller ensures easy integration through standard communication hardware and different algorithms. The complete PLC that this input controller is part of comes with a CPU, power supply inputs, and outputs that are all built into a single small device.
The IC693MDL653 input controller comes with a high-speed counter for high efficiency. The unit features a user logic program for controlling the end process when the whole PLC is controlled by using a dedicated instruction sequencer coprocessor. To promote high performance for the point-to-point applications, the IC693MDL653 input controller features an integrated motion controller. The IC693MDL653 input controller is built with EtherNet Communication to provide a real-time link between the plant floor and various departments. This is to ensure the real-time control and monitoring of the equipment. The IC693MDL653 input controller can connect to an Ethernet-enabled CPU or a selection of the rack-mountable EtherNet module. The Series 90-30 PLC is built to support the SRTP and the Modbus TCP/IP application protocols. The IC693MDL653 input controller comes with adjustable processing power. The adjustable processing power ensures that the IC693MDL653 input controller is easy to upgrade.
| Rated Voltage: | 24 volts DC |
| # of Inputs: | 32 |
| Freq: | n/a |
| Input Current: | 7.5 mA |
| Input Voltage Range: | 24 volt DC (+10%, -20%) |
| DC Power: | Yes |
Technical Information
Specification for IC693MDL653
Rated Voltage 24 volts DC
Input Voltage Range 24 volts DC (+10%, –20%)
Inputs per Module 32 (four groups with two commons per group)
Isolation 1500 volts between field side and logic side
Input Current 7.5 mA (average) at rated voltage
Input Characteristics
On-state Voltage 15 volts DC minimum
Off-state Voltage 6 volts DC maximum
On-state Current 4.5 mA minimum
Off-state Current 2 mA maximum
On response Time 2 ms maximum
Off response Time 2 ms maximum
Internal Power Consumption 5 mA (16 inputs on) from 5 volt bus on the backplane
