GE FANUC IC693MDL230 , 120 volt AC Isolated Input module , Series 90-30

Product Description

---

The GE Fanuc IC693MDL230 is a 120 volt AC Isolated Input module. This product is made to work with the Series 90-30 Programmable Logic Controller system.

There is a single common power input terminal on this module, which provides power for all 8 input points. The points are isolated and the input circuits are reactive inputs. As the module has input characteristics, it is widely compatible with many different input devices. For example, users can operate this module with pushbuttons, electronic proximity switches and limit switches to name a few. To operate these devices, power must be supplied to the module by the user. Naturally, this must be AC power as DC power sources will not work with this module.

On the top of the unit there is an LED block. This comprises a single row of eight LED points, which represent the status of the eight input points. The LED indicators will be green during normal operation. If there is a problem, they will be red. The hinged door on the unit has a door card, which can be slipped through the gap when the door is closed. The outside surface of the card may be used to record circuit identification information. The edge of this card has red striping, which denotes that this is a high-voltage module. Users may install this AC isolated input module in any baseplate I/O slot to use it in a Series 90-30 PLC system.

 

About IC693MDL230

The GE Fanuc IC693MDL230 module is an isolated input module manufactured as part of Series 90-30. It has a 120 Volts AC voltage rating and is designed to work with the GE Fanuc Series 90-30 Programmable Logic Controller (PLC) system. The module comes with one common power input terminal that provides power for all 8 of the input points. All the points are isolated, and the input circuits are reactive inputs. With its input characteristics, this module is compatible with various input devices. For instance, the users can run this module by using pushbuttons, limit switches, or electronic proximity switches. However, the users must supply the external power source for the module to be able to operate these devices. This module uses the AC power because DC sources of power do not work with it.

 

The IC693MDL230 module comes with an LED block on top of the unit that hosts one row of 8 LED points that show the status of each of the 8 input points. These LED indicators turn green when the module is in normal operation and red when there is a system fault. This module has a hinged door with a door card that can slip through the gap whenever the door closes. The outer surface of this card can record the circuit identification information. The card comes with red edge striping which means that the module is a high voltage device. The operators can install the IC693MDL230 AC isolated input module in any of the baseplates I/O slots in the Series 90-30 Programmable Logic Controller system that hosts it.

---

Rated Voltage:	120 Volt AC
# of Inputs:	8
Freq:	50/60 Hz
Input Current:	14.5 mA at rated voltage
Isolation:	1500 volts RMS between field side and logic side
DC Power:	No

 

 

Technical Information

 

Rated Voltage	120 volts AC, 50/60 Hz
Input Voltage Range	0 to 132 volts AC, 50/60 Hz
Inputs per Module	8 (each input point has a separate common)
Isolation	1500 volts RMS between field side and logic side
	500 volts RMS between inputs
Input Current	14.5 mA (typical) at rated voltage
Input Characteristics:
On-state Voltage	74 to 132 volts AC
Off-state Voltage	0 to 20 volts AC
On-state Current	6 mA minimum
Off-state Current	2.2 mA maximum
On response Time	30 ms maximum
Off response Time	45 ms maximum
Power Consumption	60 mA (all inputs on) from 5 volt bus on backplane