GE FANUC IC693CPU341 CPU 341 Module(80K Bytes user memory), 10K Reg., 3 msec/K

for IC693CPU341

Brand GE Fanuc
Series Series 90-30
Manufacturer GE Fanuc; Emerson Automation (Current)
Manufacturer GE Fanuc
Part Number IC693CPU341
Series Series 90-30
Product Description Modular CPU
Product type CPU module
Part Number IC693CPU341
User memory 80 Kbytes
Product Description Single slot CPU
Processor type 80188
Clock speed 20 Megahertz
Typical scan rate 0.3 ms per 1K of Boolean logic
User memory 80 kilobytes
No. of supported baseplates Five (5)
Processor speeds 20 MHz
Microprocessor 90C188XL
Clock Speed 20 MHz
Expandable Yes
Voltage input 5 Volts DC

User Memory 80 Kbytes
Current draw 490 milliamps
No. of extension baseplates Four (4) expansion baseplate; Four (4) Remote I/O baseplate
Boolean Execution speed 0.3 ms per 1K logic
Register memory 9999 words
Timers / Counters > 2000
Discrete Input Points – %I 512
Communication Ports One (1) SNP Ports hosted by the Power Supply module
Serial port 1
Discrete Output Points – %Q 512
Analog Inputs – %AI 1024 Words
Interrupts Yes
Analog Outputs – %AQ 256 Words
Shift register Yes
Built-in Serial Ports 1 (uses connector on PLC power supply). Supports SNP slave and SNP-X slave protocols

Timers / Counters >2000
Interrupts No
Shift register Yes
Current load: 490 mA
Bus voltage: +5VDC

 

Product Details

 

General: The IC693CPU341 module, a member of the GE Fanuc 90-30 Series, is a single slot CPU module which is equipped with 5 baseplates. It contains 4 remote and/or expansion baseplates in addition to the 1 CPU baseplate. It is equipped with an 80C188XL processor.

Power: It runs at 20 MHz and requires a load of 490 milliamps from the +5 VDC rated power supply. The module operates at an ambient temperature range of 0 to 60 degrees Celsius (or 32 to 140 degrees Fahrenheit).

 

Memory: This CPU’s typical can rate is 0.3 milliseconds per 1K of logic (also known as Boolean contacts). With a maximum user program memory of 80K bytes, the IC693CPU341 has a register memory (%R) of 9999 words; discrete global memory (%G) of 1280 bits, internal coils (%M) of 1024 bits, output (temporary) coils (%T) of 256 bits, and system status references (%S) of 128 bits (with %S, %SA, %SB, %SC having 32 bits each).

 

I/O: Analog inputs (%AI) and outputs (%AQ) is 1024 and 256 words respectively. The discrete input (%I) and output (%Q) are 512 each. It has 16 words (%SR) system registers which are used for reference table viewing only and cannot be referenced in user logic program.

Specific: This CPU has a singular built-in serial port, which requires a connector to the PLC power supply used in the system. The port supports SNP/SNP-X slave protocols. The IC693CPU341 has PCM/CCM compatibility, although, it does require a CMM module in order to support SNP/SNP-x master, CCM, or RTU slave support. It also requires a PCM module to support RTU master.

 

LAN: IC693CPU341 has a Local Area Network (LAN) installed. This feature allows the CUP to support a variety of option modules, such as FIP, Profibut, multidrop, Ethernet, GBC, GMC and GCM+ option modules. Its early versions have RAM and optional EPROM or EEPROM for memory storage. New versions, starting with hardware version IC693CPU341-J and firmware Release 4.61, only supports RAM and optional Flash for additional memory needs.

 

 

 

 

 

 

Introductionof Technology CO.,LTD

1.
2.
3.

.

 

1.
2.
3.