Mô đun Ge Fanuc IC660TBD120 ， Genius Terminal Assembly Produced ， 93 To 132 Volts AC And 10 To 30 Volts DC
Ge Fanuc IC660TBD120 , Genius Terminal Assembly Produced , 93 To 132 Volts AC And 10 To 30 Volts DC
Technical Information
The IC660TBD120 terminal block is a terminal block for the Genius I/O high speed counter block. This counter block is used to process signals of up to 200 KHz for industrial purposes. It is mostly used with velocity measurement, material handling, motion control, and turbine flowmeter applications. The counter has 12 inputs and 4 outputs and a 5 Volts DC output voltage from a source that is attached with an oscillator output. The block is an intelligent device with failed switch diagnostics and other diagnostics features. It can be configured by using software and it offers built-in protection against power surges at the output. The IC660TBD120 terminal block allows an external battery option for backup purposes. The front section of the block has a monitoring programmer terminal that aids in the connection of handheld devices.
The frequency of the IC660TBD120 terminal block is 50/60 Hertz and it runs with a voltage rating of 12/24 Volts DC or 115 Volts AC. There are counter inputs and counter outputs on the front side of the terminal. The terminal comes with an input impedance rating of 4 kiloohms. The count rate of the terminal is 200 KHz maximum if it is selected with a high-frequency filter, and 40 Hertz maximum when a low frequency filter is selected. The environmental temperature should be set between 0 and 60 degrees Celsius for normal operation. The LED terminal on the block shows the operating status of the application, the CPU communication, the circuit faults, the bus scans, the terminal assembly mismatches, and if there is no CPU communications. The IC660TBD120 terminal block is used with a load current rating of 200 milliamps. The terminal should be grounded during the installation.
About IC660TBD120
The IC660TBD120 terminal assembly is part of the Genius I/O series and it is designed by GE Fanuc. The terminal assembly has an operating voltage range of 93 to 132 Volts AC and a frequency range of 47 to 63 Hertz. In addition to that, the ripple of the terminal is 10% maximum and it can also be connected to DC power sources with operating ranges of 10 to 30 Volts. The AC operation requirement includes 60 milliamps of typical current and 250 milliamps of maximum current. In addition to that, the DC power source needs a current range of 200 to 300 milliamps. The IC660TBD120 terminal assembly features the high-speed counter block type and it has a dropout time of 1 cycle for AC operation and a dropout time of 10 milliseconds at 12 Volts or 75 milliseconds at 24 Volts for DC operation.
The IC660TBD120 terminal assembly is used for applications such as material handling, process control, motion control, turbine flowmeter, and velocity measurement applications. The featured counter block is completely configurable and it is compatible with a variety of PLC components. The IC660TBD120 terminal assembly has a count rate that includes 200 kilohertz when a high-frequency filer is selected and 40 Hertz when a low-frequency filter is used. The terminal assembly has an output voltage drop of 2 Volts at a standard inrush and 0.25 Volts at a current rating of 0.5 Amps. The terminal has a maximum inrush current of 3 Amps per output and maximum circuit overcurrent threshold of 4 Amps. The maximum block steady state output current is 2 Amps.
for IC660TBD120
| Brand | GE Fanuc |
| Series | Genius I-O |
| Part Number | IC660TBD120 |
| Block Type | High-speed counter |
| Operating Voltage | 93 to 132 Volts AC / 10 to 30 Volts DC |
| Frequency/Ripple | 47 to 63 Hertz / 10% maximum |
| Required AC Power | 60 milli Amps typical / 250 milli Amps maximum |
| Required DC Power | 200 milli Amps typical / 300 milli Amps maximum at 12 Volts |
| Power Supply Dropout Time (DC) | 10 milliseconds at 12 Volts / 75 milliseconds at 24 Volts |
| Power Supply Dropout Time (AC) | 1 cycle |
| Dimensions (HxWxD) | 224 x 90 x 112 millimeters (8.8 x 3.5 x 4.4 inches) |
| Weight | 1.8 kilograms (4 pounds) |
| Operating Temperature | 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit) |
| Storage Temperature | -40 to 100 degrees Celsius (-40 to 212 degrees Fahrenheit) |
