Mô đun Emerson DeltaV Redundant Module KJ3222X1-BK1 SE4003S2B1 AI 8-CHANNEL 4-20mA HART Card
đại lý KJ3222X1-BK1 | nhà phân phối KJ3222X1-BK1
Emerson DeltaV Redundant Module KJ3222X1-BK1 SE4003S2B1 AI 8-CHANNEL 4-20mA HART Card
Authorized Distributors
A Emerson Authorized Distributor for DELTAV is not the only source for Emerson products. Many of the Emerson products have been discontinued and therefore are no longer available from a Emerson Authorized Supplier of Emerson Automation. WTL has many new and refurbished Emerson DELTAV parts available for purchase.
| LocalBus power rating | 12 VDC at 100 mA |
| Field circuit rating | 24 VDC at 5 mA/channel |
Environmental Specifications
| Ambient Temperature |
-40 to 70℃
|
| Shock | 10g ½ Sinewave for 11 msec |
| Vibration |
1mm Peak to Peak from 5 to 16Hz;
0.5g from 16 to 150Hz
|
|
Airborne Contaminants
|
ISA-S71.04 –1985 Airborne
Contaminants Class G3
|
| Relative Humidity |
5 to 95% Non-Condensing IP 20 Rating
|
|
Terminal block key position
|
A1 |
Note:Refer to the product label for serial number and location and date of manufacture.
Warning: This product has specific instructions for installation, removal and operation in hazardous areas. Refer to document 12P5404 “DeltaV S-Series Digital Automation System Zone 2 Installation Instructions”. Other installation instructions are available in the “DeltaV S-Series and CHARMs Hardware Installation” manual.
Removal and Insertion
When system power is energized, an I/O card can be removed or inserted only when used with the KJ1501X1-BK1 System DC/DC Power Supply operating on 24 VDC input power with primary circuit wiring inductance of less than 23 uH, or with a certified bulk power supply with an open circuit voltage Uo of 12.6 VDC and an Lo of less than 23 uH (including wire inductance).
Note: Only one unit at a time may be removed with system power energized.
In 4-wire mode, the following additional conditions must be met to insert or remove this I/O card with system power energized:
- When field power supplied to this device, either at the field terminal or as bussed field power through the carrier is de-energized.
- When non-sparking field circuits are de-energized.
An I/O loop assessment must be completed on all energy-limited nodes.A terminal block fuse may NOT be removed with field power energized for non-sparking circuits.A rotary keying system ensures compatibility between I/O cards and terminal blocks after installation is complete. The terminal block must have the keys set for the I/O card with which it is used.
Maintenance and Adjustment
This unit contains no user serviceable parts and should not be disassembled for any reason. Calibration is not required.
DeltaV Scalable Process System includes the following system parts:
1.KL1601X1-BA1I/O Port (IOP)
2.KL2101X1-BA1CHARM I/O Card (CIOC)
3.KL2102X1-BA1Wireless I/O Card (WIOC)
4.KL3002X1-BA1Discrete Out +24VDC High Side CHARM
5.KL3004X1-BA1Discrete Out +24VDC Isolated CHARM
6.KL4101X1-BA1CIOC Carrier
7.KL4102X1-BA1WIOC Carrier
8.KL4201X1-BA1CHARM Baseplate
9.KL4302X1-BA1WIOC Term Block-Redundant
10.KL4502X1-BA1CHARM Terminal, Standard (Screw)
11.KL4502X1-CA1CHARM Terminal, Injected Power (Screw)
12.KL4502X1-DA1CHARM Adress Terminal, (Screw)
13.KL4502X1-EA1CHARM Column Terminator, Bottom
14.KL4502X1-FA1CHARM Column Terminator, Top
15.KL4503X1-BA1CHARM Column Extender, Bottom
16.KL4503X1-CA1CHARM Column Extender, Top
17.KJ2003X1-BK1SD Plus Controller
18.KJ2005X1-BK1SX ControllerTa:-40C to +60C
19.KJ3202X1-BK1Discrete Output Card, 8-Channel, 24VDC High-Side
20.KJ3203X1-BK1Discrete Input Card, 32-Channel, 24VDC Dry Contact
21.KJ3204X1-BK1Discrete Output Card, 32-Channel, 24VDC High-Side
22.KJ3206X1-BK1Discrete Input Card, 8-Channel, 24VDCIsolated
23.KJ3208X1-BK1Discrete Output Card, 8-Channel, 24VDC Isolated
24.KJ3211X1-BK1Sequence of Events (SOE) Card
25.KJ3212X1-BK1Pulse Count Input Card
26.KJ3222X1-BK1Analog Input, 8-Channel, 4-20 mA withHART,4-Wire
27.KJ3241X1-BK1Serial Interface Card
28.KJ3243X1-BK1Profibus DP Card
29.KJ3244X1-BK1DeviceNet Card
30.KJ3245X1-BK1AS-Interface (AS-i)Card
31.KJ4005X1-BA12-Wide Power/Controller Carrier
32.KJ4005X1-BB1Left Extender, S-Series
33.KJ4005X1-BC1Right Extender, S-Series
34.KJ4005X1-BD1SIS Adapter
35.KJ4005X1-BE18-Wide I/O Carrier, S-Series
36.KJ4005X1-BF1Power Plug Term Block
37.KJ4005X1-BG1Bus Power Term Block
38.KJ4006X1-BA1Fieldbus H1 Term Block (simplex)
39.KJ4006X1-BB1I/O Term Block, 8-Channel
40.KJ4006X1-BC1Fused 8-Channel I/O Term Block
41.KJ4006X1-BD1Interface Term Block
42.KJ4006X1-BE1Thermocouple /mV Term Block
43.KJ4006X1-BF1DISCRETE 32-CHANNEL TermBlock
44.KJ4006X1-BG116-Channel Term Block
45.KJ4006X1-BH1Isolated Input Term Block
46.KJ4006X1-BJ1RTD /Resistance Input Term Block
47.KJ4006X1-BK1Redundant Interface TermBlock
48.KJ4006X1-BL1AIN 8-Channel Term Block (2/4 WIRE)
49.KJ4006X1-BM116-PIN Mass Term Block
50.KJ4006X1-BN124-PIN Mass Term Block
51.KJ4006X1-BP140-PIN Mass Term Block
52.KJ4006X1-BQ1Profibus Term Block
53.KJ4006X1-BR1RedundantProfibus Term Block
54.KJ4006X1–BS1Redundant AIN 8-Channel Term Block(2/4 WIRE)
55.KJ4006X1-BT1Redundant AOUT 8-Channel TermBlock
56.KJ4006X1-BU1Redundant Discrete 8-Channel TermBlock
57.KJ4006X1-BV1Redundant H1 Fieldbus Term Block
58.KJ4006X1-BW1DeviceNet Term Block
【Emerson / Delta V】Module
【ABB】Input Output Module
【AB】Module / Touch Screen
【Rosemount】Pressure and Temperature Transmitter
【Yokogawa】Pressure Transmitter
【Yaskawa】Servo Drive / Servo Motor
【GE/Fanuc】IC69 Series PLC
【Mitsubishi】Servo Drive / Servo Motor
Company Introduction
