Mô đun DeltaV Power Supply Redundant Module KJ3246X1-CA1 12P5540X022 H1 Terminal Block
đại lý KJ3246X1-CA1 | nhà phân phối KJ3246X1-CA1
DeltaV Power Supply Redundant Module KJ3246X1-CA1 12P5540X022 H1 Terminal Block
Description
Part Number:
12P5540X022
Model Type:
KJ3246X1-CA1
Manufacturer(s)
Emerson, Fisher-Rosemount
Model(s)
DELTAV KJ3246X1-CA1 12P5540X022 H1 W/IP Simplex Terminal Block
Power Specifications
| LocalBus power rating |
12 VDC at 300 mA
|
| Field circuit rating |
28 to 30VDC at 400 mA/port
|
Environmental Specifications
| Ambient Temperature | -40 to 70℃ |
| Shock | 10g ½ Sinewave for 11 msec |
| Vibration |
1mm Peak to Peak from 5 to 16Hz;
0.5g from 16 to 150Hz
|
| Airborne Contaminants |
ISA-S71.04–1985 Airborne
Contaminants Class G3
|
| Relative Humidity | 5 to 95% Non-Condensing IP 20 Rating |
| Terminal block key position | D6 |
I/O Terminal Blocks
A variety of I/O terminal blocks are available to meet specific functionality and environmental requirements of the installation. The I/O interface is a combination of the I/O card and the I/O terminal block. Each I/O interface is uniquely keyed so that once installed in a carrier slot with a terminal block, that terminal block will only accept a replacement card.
The keying mechanism consists of two keying posts that rotate and lock into the terminal block base. Each post has 6 positions: A-F and 1-6. Each card is assigned a unique key, which is marked on the side of the I/O card:
The keys prevent installation of an incorrect card, and the graphical information on the card makes it easy to determine if a keyed slot will accept a particular card.
There are 8 different I/O terminal blocks available to meet the wiring needs of field signals.
- 8-Channel terminal block
- Fused 8-Channel terminal block
- AI 8-Channel terminal block
- AI 16-Channel terminal block
- 4-wire AI 16-Channel terminal block
- Discrete 32-Channel terminal block
- Isolated Input terminal block
- RTD/Resistance terminal block
- Thermocouple terminal block
The following redundant I/O terminal blocks are available on some I/O interfaces, allowing a pair of cards to be installed as a redundant pair.
- Redundant AI 8-Channel terminal block
- Redundant AO 8-Channel terminal block
- Redundant Discrete 8-Channel terminal block
The table on the following page lists the compatiblen terminal blocks for each card, along with the cards unique key positions. The first terminal block listed is the recommended terminal block.
In addition to standard signal wiring, some cards may also be ordered with Mass Terminal blocks that allow these cards to be connected to the M-series Mass Connection Solutions or third party wiring solutions from Phoenix or if IS Barriers are required from Pepperl and Fuchs, mounted in an adjacent cabinet to
meet special signal conditioning or for optimizing field wiring solutions. Please refer to the Alliance Program website for details on approved third party products.
- 10-pin Mass termination block
- 16-pin Mass termination block
- 24-pin Mass termination block
- 40-pin Mass termination block
Ordering Information
Analog Input Cards and Termination Blocks
| Description | Model Number |
| 8 Channels 4-20 mA, HART Standard I/O Termination Block | VE4003S2B1 |
|
Redundant Standard I/O Termination Block
|
VE4033S2B1 |
| Fused I/O Termination Block | VE4003S2B2 |
| 4-wire I/O Termination Block | VE4003S2B3 |
| 16-Pin Mass Termination Block | VE4003S2B4 |
| 24-Pin Mass Termination Block | VE4003S2B5 |
| 16 Channels 4-20 mA, HART Standard I/O Termination Block | VE4003S2B6 |
| 4-wire I/O Termination Block 16 Channels 4-20 ma, HART, Plus Card | VE4003S2B7 |
| 16-Channel 2-Wire AI Terminal Block for Series 2 Plus | VE4003S2B9 |
| 16-Channel 4-Wire AI Terminal Block for Series 2 Plus | VE4003S2B10 |
| Redundant 16-Channel 2- & 4-Wire AI Terminal Block for Series 2 Plus | VE4033S2B10 |
| 8 Channels Thermocouple,mV Standard I/O Termination Block | VE4003S4B1 |
| Cold Junction Compensated (CJC) Termination Block | VE4003S5B1 |
|
Analog Input Card: 8 Channels RTD Resistant Temperature Device (RTD) Termination Block |
VE4003S6B1 |
|
Isolated Input Card
Isolated Input Terminal Block
|
VE4003S7B1 |
| Standard I/O Termination Block | VE4005S2B1 |
| Redundant Standard I/O Termination Block | VE4035S2B1 |
| Fused I/O Termination Block | VE4005S2B2 |
| 16-Pin Mass Termination Block | VE4005S2B3 |
| 16-Channel AO Terminal Block for Series 2 Plus | VE4005S2B4 |
| Redundant 16-Channel AO Terminal Block for Series 2 Plus | VE4035S2B4 |
|
Standard I/O Termination Block |
VE4001S2T1B1 |
| Fused I/O Termination Block | VE4001S2T1B2 |
| Standard I/O Termination Block | VE4001S2T2B1 |
| Redundant Standard I/O Termination Block | VE4031S2T2B1 |
| Fused I/O Termination Block |
VE4001S2T2B2
|
| 16-Pin Mass Termination Block | VE4001S2T1B3 |
| 16-Pin Mass Termination Block | VE4001S2T2B3 |
| Standard Termination Block | VE4001S2T2B4 |
|
40-pin Mass Termination Block
|
VE4001S2T2B5 |
| Redundant32-Channel DI Terminal Block for Series 2 Plus | VE4031S2T2B6 |
|
40-pin DI Mass Termination Block for Series 2 Plus (to be used with P+F HiD or HiC IS barriers and termination boards for DeltaV DCS)
|
VE4001S2T2B7 |
|
40-pin DI Mass Termination Block for Series 2 Plus including 2 x 16-channel DI Plus Mass Connection Boards*
|
VE4051S2T2B7 |
|
Redundant 40-pin DI Mass Termination Block for Series 2 Plus (to be used with P+F HiD or HiC IS barriers and termination boards for DeltaV DCS)
|
VE4031S2T2B7 |
|
Redundant 40-pin DI Mass Termination Block for Series 2 Plus including 2 x 16-channel DI Plus Mass Connection Boards *
|
VE4081S2T2B7 |
| Standard I/O Termination Block | VE4001S3T1B1 |
| Fused I/O Termination Block | VE4001S3T1B2 |
| Standard I/O Termination Block | VE4001S3T2B1 |
| Fused I/O Termination Block | VE4001S3T2B2 |
| Discrete 32 Channel Terminal Block | VE4015 |
|
Discrete 32-Channel Terminal Block
|
VE4001S5T2B4 |
| 40-pin Mass Terminal Block | VE4001S5T2B5 |
| Standard I/O Termination Block | VE4002S1T1B1 |
| Fused I/O Termination Block | VE4002S1T1B2 |
| 16-Pin Mass Termination Block | VE4002S1T1B3 |
| Standard I/O Termination Block |
VE4002S1T2B1
|
| Redundant Standard I/O Termination Block | VE4032S1T2B1 |
| Fused I/O Termination Block | VE4002S1T2B2 |
| 16-Pin Mass Termination Block | VE4002S1T2B3 |
| 10-Pin Mass Termination Block | VE4002S1T2B4 |
| Standard I/O Termination Block | VE4002S1T2B5 |
| 40-Pin Mass Termination Block | VE4002S1T2B6 |
|
40-pin DO Mass Termination Block for Series 2 Plus (to be used with P+F HiD or HiC IS barriers and termination boards for DeltaV DCS)
|
VE4002S1T2B8 |
|
40-pin DO Mass Termination Block for Series 2 Plus including 4 x 8-channel DO Mass Connection Boards *
|
VE4052S1T2B8 |
|
Redundant 40-pin DO Mass Termination Block for Series 2 Plus (to be used with P+F HiD or HiC IS barriers and termination boards for DeltaV DCS)
|
VE4032S1T2B8 |
|
Redundant 40-pin DO Mass Termination Block for Series 2 Plus including 4 x 8-channel DO Mass Connection Boards *
|
VE4082S1T2B8 |
| Standard I/O Termination Block | VE4002S2T1B1 |
| Fused I/O Termination Block | VE4002S2T1B2 |
|
Standard I/O Termination Block
|
VE4002S2T2B1
|
| Fused I/O Termination Block | VE4002S2T2B2 |
| 250V 2A Fuse for Fused Terminal Block; Box of 20 |
KJ4010X1-BC1
|
Contact:
【Emerson / Delta V】Module
【ABB】Input Output Module
【AB】Module / Touch Screen
【Rosemount】Pressure and Temperature Transmitter
【Yokogawa】Pressure Transmitter
【Yaskawa】Servo Drive / Servo Motor
【GE/Fanuc】IC69 Series PLC
【Mitsubishi】Servo Drive / Servo Motor
