Mô đun Bently Nevada Power Supply 3500/42 – 135489-01 I/O MODULE 4CHANNEL INTERNAL BARRIER
Bently Nevada Power Supply 3500/42 – 135489-01 I/O MODULE 4CHANNEL INTERNAL BARRIER
Configuration:
Transducer Type: Prox/Accel on Channels 1 Through 4
Channel Monitor
Accepts Inputs from Proximitor and Seismic Transducers
Provides Machinery Protection
Part Number: 135489-01
Features
(4) Channel Monitor
Accepts Inputs from Proximitor and Seismic Transducers
Provides Machinery Protection
Description
The GE / Bently Nevada 3500/42 Series Proximitor /Seismic Monitor Modules are four channel monitor that accepts input from Proximitor and Seismic Transducers and uses this input to drive alarms. The monitor can be programmed using the 3500 Rack Configuration Software to perform any of the following functions: Radial Vibration, Thrust Position, Eccentricity, Differential Expansion, Acceleration, and Velocity. The monitor can receive input from many types of transducers including the following Bently Nevada transducers: Proximitor Transducers, Acceleration, and Velocity.
The primary purpose of the 3500/42 monitor is to provide 1) machinery protection by continuously comparing current machine vibration against configured alarm setpoints to drive alarms and, 2) essential machine vibration information to both operator and maintenance personnel. Alarm setpoints are configured using the 3500 Rack Configuration Software. Alarm setpoints can be configured for each active proportional value and danger setpoints can be configured for two of the active proportional values.
Product Family: 3500/42 Series, 3500_42, 135489-01, 135489_01, 135489-02, 135489-03
Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- | Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- | Emerson VE-,KJ- |
| Honeywell TC-,TK- | GE Modules IC – |
| Fanuc motor A0- | Yokogawa transmitter EJA- |
|
2
|
3500/92, MODBUS RS232/RS422 I/O MODULE
P/N: 125736-01 |
|
3
|
PROXIMITOR I/O MODULE
P/N: 126615-01 |
|
4
|
KEY PHASOR I/O MODULE 3500/25
P/N: 126648-01 |
|
5
|
16-CHANNEL RELAY MODULE
P/N: 149986-01 |
|
6
|
ISOLATED + 4 TO 20 MA. I/O MODULE WITH EXTERNAL TERMINATIONS
P/N: 136483-01 |
|
7
|
3500/92 COMMUNICATION GATEWAY MODULE
P/N: 136180-01 |
|
8
|
PROXIMITY PROBE
P/N: 330101-10-35-10-02-05 |
|
9
|
PROXIMITY PROBE
P/N: 330101-00-25-10-02-05 |
|
PARTS FOR “BENTLY NEVADA” MONITORING SYSTEM
SERIES 31000 & 32000 REF . BENTLY NEVADA CORP. |
|
|
10
|
3301 XL 8 MM PROBE
P/N: 330106-05-30-10-02-05 |
|
11
|
PROXIMITY PROBE
P/N: 330101-15-48-10-02-05 |
|
12
|
PROXIMITY PROBE
P/N: 330101-00-33-10-02-05 |
|
P/F “BENTLY NEVADA” VIBRATION & POSITION METERS
SERIES 5000 & 7200 REF . BENTLY NEVADA . PO . BOX.157. ONE AIRPORT SERIES 7200 |
|
|
13
|
PROBE
P/N: 86691-01250-0400-15 |
|
P/F “BENTLY NEVADA” 5MM PROXIMITY TRANSDUCER
SYSTEM SERIES 3300 REF BENTLY NEVADA CORPORATION |
|
|
14
|
VIBRATION SENSOR
P/N: 330105-02-12-10-02-05 |
|
PARTS FOR “BENTLY ” VIBRATION MEASURING SYSTEM
MODELS 3300 REF . BENTLY NEVADA |
|
|
15
|
PROXIMITY PROBE
P/N: 330101-10-45-10-02-05 |
|
16
|
VELOMITOR TRANSDUCER
P/N: 330500-01-02 |
|
17
|
ACCELEROMETER
P/N: 330400-01-05 |
|
18
|
3300 XL PROXIMITOR SENSOR
P/N: 330180-12-00 |
|
19
|
UPGRADE KIT, NON APROVED
P/N: 178850-05 |
|
20
|
PROXIMITOR SENSOR MODEL 3300XL 8MM
P/N: 330180-51-05 |
|
21
|
COAXIAL CABLE
P/N: 330130-040-00-05 |
The 3500/42M Proximitor*/Seismic Monitor is a 4-channel monitor that accepts
input from proximity and seismic transducers, conditions the signal to provide
various vibration and position measurements, and compares the conditioned
signals with user-programmable alarms. The user can program each channel of
the 3500/42M using the 3500 Rack Configuration Software to perform any of the
following functions:
• Radial Vibration
• Thrust Position
• Differential Expansion
• Eccentricity
• REBAM*
• Acceleration
• Velocity
• Shaft Absolute
• Circular Acceptance Region
The primary purpose of the 3500/42M monitor is to provide:
1. Machinery protection by continuously comparing monitored parameters against configured alarm setpoints to drive alarms.
2. Essential machine information for both operations and maintenancepersonnel.
Each channel, depending on configuration, typically conditions its input signal togenerate variouparameter called “static values”. The user can configure Alertsetpoints for each active static value and Danger setpoints for any two of the active static values.
