The Analog In 8 Channel Bipolar module accepts a mix of current and voltage inputs. Jumpers are required between the input and sense terminals for current inputs

 

 

 

Illustration

The following figure shows the 140 AVI 030 00 module and its components.

 

 

 

1 Model Number, Module Description, Color Code
2 LED Display
3 Fuse Cutouts
4 Field Wiring Terminal Strip
5 Removable Door
6 Customer Identification Label (Fold label and place it inside door)
NOTE: The field wiring terminal strip (Modicon #140 XTS 002 00) must be ordered separately. (The terminal strip includes the removable door and label.

 

 

        

 

External Wiring Recommendation
1. The user supplies the current and voltage sources (installation and calibration of
fuses are at the discretion of the user).
2. Use shielded signal cable. In noisy environnements, twisted shielded cable is
recommended.
3. Shielded cables should be connected to the PLC’s ground.
4. A Shield Bar (STB XSP 3000 and STB XSP 3010/3020) should be used to
connect the shielded cable to ground (see Quantum with Unity Pro, Hardware,
Reference Manual).
5. N / C = Not connected.
NOTE: When field wiring the I/O module, the maximum wire size that should be
used is 1-14 AWG or 2-16 AWG; the minimum size is 20 AWG

 

Warning

UNWIRED INPUTS CAUSE INVALID READINGS
When configured for voltage inputs (no jumper installed between INPUT(+) and ISENSE terminals), if a broken field wire occurs, readings will be non-zero and not predictable. The field wiring terminal strip must not be removed when the module is operating.
Failure to follow these instructions can result in injury or equipment damage

 

 

Danger

HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
Before accessing the fuses,
? Remove the power to the module (pre-actuators), and
? disconnect the terminal block.
? Always use a properly rated voltage sensing device at all line and load fuse clips
to confirm power is off.
Failure to follow these instructions will result in death or serious injury

 

 

 

The popular 140-ARI-030-10 Input Module is a part of the Modicon Quantum series. The Quantum 140ARI03010 RT Input Module provides 8 channels of 2-wire, 3-wire, and 4-wire RTD inputs. Temperment measurement data is provide to the Quantum CPU.

The 140ARI03010 specs include broken wire and short circuit detection. A quantum removable terminal strip (140XTS00200) is available and allows for easy maintenance. The 140ARI03010 weight is 0.3 kg.

Quantum backplanes, such as the 10 slot 140XBP01000, are sold separately. These come in 2, 3, 4, 6, 10, and 16 slot versions. Any quantum module can be used in any slot. A Quantum power supply is required in each rack, such as the 140CPS11420. The power supply provides logic power to all modules on the bus.

All Quantum I/O modules, including the 140ARI03010, are optically isolated from the bus, ensuring safe and trouble-free operation. The isolation allows modules to be hot swapped.

Optionally, you can inster mechanical keys between the I/O module and the terminal strip to ensure that the field wiring and the module type are properly matched. Key codes are unique for each module type. Key kits are shipped with each I/O module.

As an option, modules can be ordered with a conformal coating (designated as 140ARI03010C) which will protect the internal circuitry from corrosive gases such as Chlorine, Nitric Oxide, Hydrogen Sulfide, and Sulfur Dioxide.

For more info you can check out our product page. To get a 140ARI03010 price, delivery info, or if you have any questions, you can email or call 0086-.