Mô đun Allen Bradley PLC-5 Processor Module Controller 64K 1785-L60B Series E
Allen Bradley PLC-5 Processor Module Controller 64K 1785-L60B Series E
Technical specifications:
Backplane Current PLC-5/11, -5/20, -5/30: 2.3A @ 5Vdc
PLC-5/40, -5/40L, -5/46, -5/60, -5/60L, -5/80, -5/86: 3.3A @ 5Vdc
Isolation Voltage Communication Ports – tested to 500V for 60 seconds
Relay Cartridge – tested to 1000V for 60 seconds
Operating Temperature
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock):
0-60o
C (32–140o
F)
Storage Temperature IEC 60068-2-1 (Test Ab, Un-packaged Non-operating Cold),
IEC 60068-2-2 (Test Bc, Un-packaged Non-operating Dry Heat),
IEC 60068-2-14 (Test Na, Un-packaged Non-operating Thermal Shock):
–40 to 85o
C (–40 to 185o
F)
Relative Humidity IEC 60068-2-30 (Test Db, Un-packaged Non-operating
Damp Heat):
5–95% non condensing
Vibration IEC60068-2-6 (Test Fc, Operating):
2g @10–500Hz
Shock IEC60068-2-27:1987, (Test Ea, Unpackaged shock):
Operating – 30g
Non-operating – 50g
Emissions CISPR 11:
Group 1, Class A (with appropriate enclosure)
ESD Immunity IEC 61000-4-2:
4kV contact discharges
Radiated RF Immunity IEC 61000-4-3:
10V/m, with 1kHz sine-wave 80% AM from 30MHz to 1000Mhz
EFT/B Immunity IEC 61000-4-4:
+2kV at 5kHz on communications ports
Surge Transient Immunity IEC 61000-4-5:
+2kV line-earth(CM)
on communications ports
Conducted RF Immunity IEC 61000-4-6:
10Vrms with 1kHz sine-wave 80%AM from 150kHz
to 30MHz
Enclosure Type Rating None (open style)
Time-of-Day Clock/Calendar1 Maximum Variations at 60× C: ± 5 min per month
Typical Variations at 20× C: ± 20 s per month
Timing Accuracy: 1 program scan
Available Cartridges 1785-RC Relay Cartridge
Battery AB 1770-XYC
Memory Modules • 1785-ME32
• 1785-ME64
• 1785-M100
I/O Modules Bulletin 1771 I/O, 1794 I/O, 1746 I/O, and 1791 I/O
Estimated Size
Dimensions:2″ x 7″ x 11″
(5 cm x 18 cm x 28 cm)
Weight:3 lbs 0 oz (1.36kg )
1 Regardless of this switch setting, outputs are turned off when any of the following occurs:
– controller detects a runtime error
– an I/O chassis backplane fault occurs
– you select program or test mode
– you set a status file bit to reset a local rack
2 If an EEPROM module is not installed and controller memory is valid, the controller’s PROC LED indicator blinks,
and the processor sets S:11/9, bit 9 in the major fault status word. To clear this fault, change the controller from
program mode to run mode and back to program mode.
3 If the controller’s keyswitch is set in REMote, the controller enters remote RUN after it powers up and has its
memory updated by the EEPROM module.
4 A processor fault (solid red PROC LED) occurs if processor mem
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- | Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- | Emerson VE-,KJ- |
| Honeywell TC-,TK- | GE Modules IC – |
| Fanuc motor A0- | Yokogawa transmitter EJA- |
Similar Products
|
1785-L11B |
This equipment is sensitive to electrostatic discharge that can cause internal damage and affect normal operation. Follow these guidelines when you handle this equipment:
• touch a grounded object to discharge potential static
• wear an approved grounding wrist strap
• do not touch connectors or pins on component boards
• do not touch circuit components inside the equipment
• if available, use a static-safe workstation
• when not in use, store the equipment in appropriate static-safe packaging
• This equipment is intended for use in a Pollution Degree 2 industrial environment, in overvoltage Category II
applications (as defined in IEC publication 60664-1), at altitudes up to 2000 meters without derating.
• This equipment is considered Group 1, Class A industrial equipment according to IEC/CISPR Publication 11. Without appropriate precautions, there may be potential difficulties ensuring electromagnetic compatibility in other environments due to conducted as well as radiated disturbance.
• This equipment is supplied as “open type” equipment. It must be mounted within an enclosure that is suitably
designed for those specific environmental conditions that will be present and appropriately designed to prevent personal injury resulting from accessibility to live parts. The interior of the enclosure must be accessible only by the use of a tool. Subsequent sections of this publication may contain additional information regarding specific enclosure type ratings that are required to comply with certain product safety certifications.
NOTE: See NEMA Standards publication 250 and IEC publication 60529, as applicable, for explanations of the
degrees of protection provided by different types of enclosure. Also, see the appropriate sections in this
publication, as well as the AB publication 1770-4.1 (“Industrial Automation Wiring and Grounding Guidelines”), for additional installation requirements pertaining to this
equipment.
