Mô đun 16 points 24V DC 7 mA Redundant Power Supply Module AJ65SBTC1-32DT Mitsubishi

đại lý AJ65SBTC1-32DT | nhà phân phối AJ65SBTC1-32DT

16 points 24V DC 7 mA Redundant Power Supply Module AJ65SBTC1-32DT Mitsubishi

Input specification

Input format	DC input (plus common type)
Number of input points	16 points
Rated input voltage	24V DC (within 5% ripple rate) (permissible voltage range: 19.2 to26.4V DC)
Rated input current	About 7 mA
Maximum number of simultaneous input points	100%
ON voltage / ON current	14V or more / 3.5mA or more
OFF voltage / OFF current	6 V or less / 1.7 mA or less
Input resistance	Approximately 3.3 kΩ
Input response time OFF → ON	1.5 ms or less (DC 24 V)
Input response time ON → OFF	1.5 ms or less (DC 24 V)
Input isolation method	Photocoupler isolation

Output specification

Output format	Transistor output (sink type)
Output points	16 points
Rated load voltage	DC24V
Operating load voltage range	DC 19.2 to 26.4 V (within 5% ripple rate)
Maximum load current	0.5A / 1 point, 3.6A / 1 common
Maximum inrush current	1.0A 10ms or less
OFF current leakage current	A0.25 mA or less
Maximum voltage drop when ON	DC 0.3 V or less (TYP.) 0.5 A, DC 0.6 V or less (MAX.) 0.5
Output response time OFF → ON	0.5 ms or less
Output response time ON → OFF	1.5 ms or less (resistive load)
Surge killer	Zener diode
Protection function	Over load protection function, over voltage protection function, over temperature protection function
Output unit external power supply voltage	DC 19.2 to 26.4 V (within 5% ripple rate)
Current	30 mA or less (24 V DC, common) excluding external load current
Output isolation method	Photocoupler insulation

Common specification

Common method	32 points 1 common (Terminal trapezoidal 1-wire type)
Dielectric breakdown voltage	Between DC external terminal block and ground: AC500V 1 minute
Insulation resistance	Between DC external terminal block and ground: 10 MΩ or more with DC 500 V insulation resistance tester
Protection grade	IP2X
Station type	Remote I / O station
Number of occupied stations	1 station
Unit power supply voltage	DC 20.4 to 26.4 V (within 5% ripple rate)
Current	60 mA or less (24 V DC, all points on)
External wiring connection method	Communication unit, unit power supply unit: 7-point 2-piece terminal block (M3 screw) Input / output power supply unit, input / output unit: 34-point direct mount terminal block (M3 screw)
Dimension height (H)	50 mm
Width (W)	179 mm
Depth (D)	40 mm
mass	0.25 kg

Attribute	Value
For Use With	MELSEC Q Series
Number of I/O	2048
Manufacturer Series	MELSEC Q
Input Type	Analogue, Digital
Voltage Category	5 V dc
Output Type	Analogue, Digital
Communication Port Type	RS232C
Program Capacity	32 kB
Programming Interface	Computer, Operating Panel
Length	89.3mm
Maximum Inputs/Outputs	8192
Number of Communication Ports	1
Width	27.4mm
Maximum Operating Temperature	+55°C
Dimensions	89.3 x 27.4 x 98 mm
Depth	98mm
Battery Backup	Yes
Minimum Operating Temperature	0°C
Mounting Type	DIN Rail
Memory	94 kB

Similer item we can supply:

【Emerson】DeltaV Module / Servo Motor

【ABB】Input Output Module

【AB】Module / Touch Screen

【Rosemount】Pressure and Temperature Transmitter

【Yokogawa】Pressure Transmitter

【Yaskawa】Servo Drive / Servo Motor

【Mitsubishi】Servo Drive / Servo Motor

【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive

Company website:www.wtltian.com

temperature protection function