Bently Nevada Proximity PROBE 330101-00-08-10-02-00 3300 XL 8MM 3/8-24 UNF thread NEW

Ordering Information for Probes

3300 XL 8 mm Proximity Probes:

330101 3300 XL 8 mm Probe, 3/8-24 UNF thread, without armor2

330102 3300 XL 8 mm Probe, 3/8-24 UNF thread, with armor2

Part Number-AXX-BXX-CXX-DXX-EXX

A:Unthreaded Length Option

Note:Unthreaded length must be at least 0.8 inches less than the case length.

Order in increments of 0.1 in Length configurations:Maximum unthreaded length: 8.8 in Minimum unthreaded length: 0.0 inExample: 0 4= 0.4 in

B:Overall Case Length Option

Order in increments of 0.1 inThreaded length configurations:Maximum caselength:9.6 inMinimum case length: 0.8 inExample: 2 4 = 2.4 in

C:Total Length Option

05 0.5 meter(1.6 feet)
10 1.0 meter(3.3 feet)
15 1.5 meter(4.9 feet)
20 2.0 meters (6.6 feet)
30 3.0 meters (9.8 feet)
50 5.0 meters (16.4 feet)
90 9.0 meters (29.5 feet)

Note: 3-meter length option is only available on 330101 probes, and are designed for use with the 9 meterProximitor sensor only.

5-meter probes are designed for use with the 5 meterProximitor sensor only.

D:Connector and Cable-Type Option

01 Miniature coaxial ClickLoc connector with connector protector, standard cable.
02 Miniature coaxial ClickLoc connector, standard cable.
11 Miniature coaxial ClickLoc connector with connector protector, FluidLoc cable.
12 Miniature coaxial ClickLoc connector, FluidLoc cable.

E:Agency Approval Option

00 Not required
05 CSA, ATEX, IECEx Approvals

Description

Proximity Probe and Extension Cable

The 3300 XL probe and extension cable also reflect improvements over previous designs. A patented TipLoc* molding method provides a more robust bond between the probe tip and the probe body. The probe’s cable incorporates a patented CableLoc* design that provides 330 N (75 lbf) pull strength to more securely attach the probe cable and probe tip.You can also order 3300 XL 8 mm probes and extension cables with an optional FluidLoc* cable option. This option prevents oil and other liquids from leaking out of the machine through the cable’s interior.

Transducer System

The 3300 Proximity Transducer System consists of:

• a 3300 XL 8 mm probe or 3300 5 mm probe
• a 3300 XL extension cable
• a 3300 Proximitor Sensor

The system provides an output voltage directly proportional to the distancebetween the probe tip and the observed conductive surface. It is capable ofboth static (position) and dynamic (vibration) measurements, and is primarilyused for vibration and position measurement applications on fluid-filmbearing machines, as well as Keyphasor and speed measurementapplications.

The system provides an accurate, stable signal output over a widetemperature range. All 3300 Proximity Transducer Systems achieve thislevel of performance while allowing complete interchangeability of probe,extension cable, and Proximitor Sensor without the need for individualcomponent matching or bench calibration.