Bộ lập trình Programmable Logic Controller (PLC) DIN Rail 24VDC AFP0RF32MT Panasonic

đại lý AFP0RF32MT | nhà phân phối AFP0RF32MT

Programmable Logic Controller (PLC) DIN Rail 24VDC AFP0RF32MT Panasonic

Panasonic PLC Unit AFP0HC32ET

Features

Ultra high-speed processing enhances productivity
An ultra high speed of 0.08µs/step for basic instructions for the first 3000 steps and 0.58µs/step thereafter. The FP0R is ideal for positioning and process automation applications, e.g. in labeling machines.
Large programming capacity of 16k or 32k steps
Generous data register of up to 12k or 32k words
Independent comment memory
USB2.0 port provides high-speed program transfer
The new F-type FP0R provides maintenance-free and complete backup of all data without requiring a battery. Industry’s first!
Highly advanced, built-in positioning functions
– Jog operation
– Individual settings for acceleration and deceleration for ramp functions
– Target speed can be changed by an external signal input during jog operation or trapezoidal control
– Can read encoder signals of up to 50kHz (pulse frequency measurement)
– 6-channel high-speed counters and 4-axis pulse outputs can be used simultaneously
FP0R units provide various kinds of networking communication using a built-in interface or expansion units
– Ethernet (Modbus TCP/IEC60870)
– Profibus
– CC-Link
– MEWNET-W0
– C-NET
– RS232C or RS485 serial communication.

Specification

Input specifications

Item	Specifications
Rated input voltage	24 V DC
Applied voltage range	21.6 to 26.4 V DC
Rated input current	2.6 mA approx. (at 24 V DC)
Input impedance	9.1 kΩ approx.
Input points per common	16 points / common
Min. ON voltage/Min. ON current	19.2 V / 2 mA
Max. OFF voltage/Max. OFF current	2.4 V / 1.2 mA
Response time : OFF→ON	20 μs or less * An input time constant (0.1 to 64 ms) can be set.
Response time : ON→OFF	Same as above
Insulation method	Photocoupler
Remark	Since the response time of X0 to X7 is very fast (for high-speed counter input) the FP0 happens to chattering noise as an input signal. To prevent this, it is recommended that the timer should be put in the ladder program.

Output specifications

Item	Specifications
Output type	Open collector
Rated load voltage	5 to 24 V DC
Load voltage allowable range	4.75 to 26.4 V DC
Max. load current	0.2 A / point (Max. 14 per common terminal)
OFF state leakage current	1 μA or less
ON state voltage drop	0.2 V DC or less
Response time : OFF→ON	20 μs or less (Load current : 5 mA or more), 0.1 ms or less (Load current : 0.5 mA or more)
Response time : ON→OFF	40 μs or less (Load current : 5 mA or more), 0.2 ms or less (Load current : 0.5 mA or more)
External power : Voltage	21.6 to 26.4 V DC
External power supply : Current	60 mA or less
Surge absorber	Zener diode
Output points per common	16 points / common
Insulation method	Photocoupler

The following are some of the drive models, both new and used are stocked:

【Honeywell】Module DCS / PLC

【Emerson】DeltaV Module / Servo Motor

【ABB】Input Output Module

【AB】Module / Touch Screen

【Rosemount】Pressure and Temperature Transmitter

【Yokogawa】Pressure Transmitter

【Yaskawa】Servo Drive / Servo Motor

【Mitsubishi】Servo Drive / Servo Motor

【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive

Company website:www.wtltian.com