Bộ lập trình GE Fanuc IC693CPU352 240K Bytes configurable user memory, 4K I/O, 8 Racks, Hardware FLOATING POINT MATH
GE Fanuc IC693CPU352 240K Bytes configurable user memory, 4K I/O, 8 Racks, Hardware FLOATING POINT MATH
The IC693CPU352 is a single slot CPU module manufactured by GE Automation and Controls for the Series 90/30 PLC system. The total number of Baseplates for each system is 8, which includes one baseplate for CPU, and seven remote and expansion. The load requirement of the Power Supply is 890mA from a +5Volts DC supply. The processor type is an 80386EX with a processing speed of 25Mhz. The optimum operating temperature for the system is between 0 degrees and 60 degrees Celsius (32 degrees and 140 degrees Fahrenheit). This specification is also referred to as the ambient temperature. The typical rate of scanning is 0.22milliseconds for every 1K logic (I.e., Boolean contacts).
QUICK DETAILS
OTHER SUPERIOR PRODUCTS
Yasakawa Motor, Driver SG- | Mitsubishi Motor HC-,HA- |
Westinghouse Modules 1C-,5X- | Emerson VE-,KJ- |
Honeywell TC-,TK- | GE Modules IC – |
Fanuc motor A0- | Yokogawa transmitter EJA- |
Since the release of version 9.0 firmware, the maximum program memory for the user is 240K Bytes. However, the effective available size of the program memory for the user depends on configured amounts for configurable types of word memory. The discrete input and output points are 2048 each, 4096 bits for internal coils, 1280 bits for global memory, 256 bits for temporary output coils, 128 bits total (%S, %SB, %SA, %SC which have 32 bits for each) as references for system status. There are %R (Register Memory), %AI (Analog Inputs), %AQ (Analog Outputs), all configurable in increments of 128 words.
There are more than 2000 numbers of Timers/Counters, and there are also Shift Registers present. There are three serial ports built-in, which support RTU slave and SNP or SNPX slave, and SNP or SNPX master or slave, and Serial Input/output (on port 1 and port 2). Communications support LAN (multidrop supported), Ethernet, Profibus, FIP, GBC, GCM+ option modules. Flash memory and RAM are the available storage memory types. The Logicmaster configuration and programming software support CPU352.
IC693ACC300 Input Simulator Module
IC693ACC300LT Input Simulator Module (LT)
IC693ACC301 Replacement Battery, CPU & PCM
IC693ACC302 High capacity battery pack.
IC693ACC303 Memory Card, 32 KBytes, Use With HHP
IC693ACC305 EEPROM Chips
IC693ACC306 EPROM Chips
IC693ACC307 I/O Bus Terminator Plug
IC693ACC308 Rack Adaptor Bracket, Series 90-30 10 Slot to 19″ (Front Mount)
IC693ACC309 Rack Adaptor Bracket, Series One 5 and 10 Slot Racks
IC693ACC310 Filler Module, Blank Slot
IC693ACC311 Terminal Blocks
IC693ACC315 Battery Adapter Kit (battery not included) for CPU31* and CPU32*
IC693ACC316 Connector Kit, 24 Pin, Solder Eyelet (For MDL654, 655, 752, 753)
IC693ACC317 Connector Kit, 24 Pin, Crimp Type (For MDL654, 655, 752, 753)
IC693ACC318 Connector Kit, 24 Pin, Ribbon Type (For MDL654, 655, 752, 753)
IC693ACC319 Spare Parts Kit (I/O, CPU, PCM)
IC693ACC320 Spare Parts Kit (Power Supply)
IC693ACC328 Utility Update Software
IC693ACC329 TBQC Base for IC693MDL645, IC693MDL646, and IC693MDL240
IC693ACC330 TBQC Base for IC693MDL740, IC693MDL742
IC693ACC331 TBQC Base for IC693MDL741
IC693ACC332 TBQC Base for IC693MDL940
IC693ACC333 TBQC Base for IC693MDL340
IC693ACC334 Module Connector for use with all 9030 terminal bases
IC693ACC335 Axis Terminal Block for the Motion Mate DSM302
IC693ACC336 Auxiliary Terminal Block for the Motion Mate DSM302
IC693ACC337 TBQC Base for IC693MDL654/655/752/753
IC693ACC338 CPU364 FACEPLATE KIT CONTAINS 5 EACH FRONT PLASTIC AND LABELS
IC693ACC340 Redundant Power Supply Base (RPSB) with 0.1 meter cable to connect to Power Supply Adapter module. Supports any Series 90-30 power supply.
IC693ACC341 Redundant Power Supply Base with 0.5 meter cable to connect to Power Supply Adapter module. Supports any Series 90-30 power supply.
IC693ACC350 Redundant Power Supply Adapter (RPSA) Module. The RPSA replaces the power supply on a CPU base or expansion base and connects to a Redundant Power Supply Base.
IC693ACC760 Solenoind Valve Module Forcing Pendent
IC693ADC311 CIMPLICITY 90-ADS Coprocessor (Repeat Systems)
IC693ADS301 CIMPLICITY 90-ADS Package (First System)
IC693ALG222 Analog Input, Voltage 16 Single/8 Differential Channels
IC693ALG222LT Analog Input, Voltage 16 Single/8 Differential Channels (LT)
IC693ALG390 Analog Output, Voltage, 2 Channels
IC693ALG390LT Analog Output, Voltage, 2 Channels (LT)
IC693ALG392 High Density Analog Output (8 Channels)
IC693ALG392LT High Density Analog Output (8 Channels) (LT)
IC693ALG442 Analog Combo Module 4IN/2OUT
IC693ALG442LT Analog Combo Module 4IN/2OUT (LT)
IC693APU300 High Speed Counter (HSC)
IC693APU300LT High Speed Counter (HSC) (LT)
IC693APU301 Axis Positioning Module (APM), 1 Axis
IC693APU302 Axis Positioning Module (APM), 2 Axis
IC693APU305 I/O Processor Module
IC693BEM320 I/O Link Interface Module (Slave)
IC693BEM321 I/O Link Interface Module (Master)
IC693BEM331 Genius Bus Controller
IC693BEM331LT Genius Bus Controller (supports I/O and Datagrams) (LT)
IC693CBK001 Cable Kit for High Density I/O Modules (includes CBL327 and CBL328)
IC693CBK002 Cable Kit for High Density I/O Modules (includes CBL329 and CBL330)
IC693CBK003 Cable Kit for High Density I/O Modules (includes CBL331 and CBL332)
IC693CBK004 Cable Kit for High Density I/O Modules (includes CBL333 and CBL334)
IC693CBL300 Cable, I/O Expansion, 1 Meter
IC693CBL301 Cable, I/O Expansion, 2 Meters
IC693CBL302 Cable, I/O Expansion, 15 Meters
IC693CBL303 Cable, Hand Held Programmer (HHP), 2 Meters
IC693CBL304 Cable, Port Expansion, Used With PCM300
IC693CBL305 Cable, Port Expansion, Used With PCM301, PCM311, and CMM311
IC693CBL306 Cable, Extension, 1 Meter (Use with MDL652-653, MDL750-751)
IC693CBL307 Cable, Extension, 2 Meters (Use with MDL652-653, MDL750-751)
IC693CBL308 Cable, Single Connector, 1 Meter (Use with MDL652-653, MDL750-751)
IC693CBL309 Cable, Single Connector, 2 Meters (For MDL652-653, MDL750-751)
IC693CBL311 Cable, APM300/MCS300 Digital I/O, 24 Pin, 3 Meters
IC693CBL312 Cable, I/O Expansion, 0.15 Meters, Shielded
IC693CBL313 Cable, I/O Expansion, 8 Meters
IC693CBL316 Station Manager Serial Cable for Ethernet TCP/IP
IC693CBL324 Cable, Terminal Board Connections for DSM302, 1 Meter
IC693CBL325 Cable, Terminal Board Connections for DSM302, 3 Meters
IC693CBL327 Cable, Left Side, One – 24 Pin 90 Degree Connector, 3 Meter
IC693CBL328 Cable, Right Side, One – 24 Pin 90 Degree Connector, 3 Meter
IC693CBL329 Cable, Left Side, Two – 24 Pin 90 Degree Connectors, 1 Meter
IC693CBL330 Cable, Right Side, Two – 24 Pin 90 Degree Connectors, 1 Meter
IC693CBL331 Cable, Left Side, Two – 24 Pin 90 Degree Connectors, 2 Meter
IC693CBL332 Cable, Right Side, Two – 24 Pin 90 Degree Connectors, 2 Meter
IC693CBL333 Cable, Left Side, Two – 24 Pin 90 Degree Connectors, .5 Meter
IC693CBL334 Cable, Right Side, Two – 24 Pin 90 Degree Connectors, .5 Meter
IC693CDC200 Series 90-30 CsCAN interface module. One CsCAN port and one programming port for network devices.
IC693CHS391 Base, CPU, 10 Slots, Use With CPU331/CSE331 and above
IC693CHS391LT Base, CPU, 10 Slots, Use With CPU331/CSE331 and above (LT)
IC693CHS392 Base, Expansion, 10 Slots
IC693CHS392LT Base, Expansion, 10 Slots (LT)
IC693CHS393 Base, Remote Expansion, 10 Slots (700 ft.)
IC693CHS393LT Base, Remote Expansion, 10 Slots (700 ft.) (LT)
IC693CHS397 Base, CPU, 5 Slots, Use With CPU331/CSE331 and above
IC693CHS397LT Base, CPU, 5 Slots, Use With CPU331/CSE331 and above (LT)
IC693CHS398 Base, Expansion, 5 Slots
IC693CHS398LT Base, Expansion, 5 Slots (LT)
IC693CHS399 Base, Remote Expansion, 5 Slots (700 ft.)
IC693CHS399LT Base, Remote Expansion, 5 Slots (700 ft.) (LT)
IC693CMM301 Genius Communications Module, GCM (256 bits)
IC693CMM302 Communication Module, Genius (1 Kbyte) GCM+
IC693CMM302LT Communication Module, Genius (1 Kbyte) GCM+ (no datagram support) (LT)
IC693CMM311 Communications Module, CCM, RTU, SNP, and SNPx Protocols
IC693CMM311LT Communications Module, CCM, RTU, SNP, and SNPx Protocols (LT)
IC693CMM321 Ethernet Interface TCP/IP Module
IC693CPU311 5-Slot Base With CPU in base (6K Bytes User Program)
IC693CPU311LT 5-Slot Base With CPU in base (6K Bytes User Program) (LT)
IC693CPU313 5-Slot Base With Turbo CPU in base (.6 msec), 1K Registers, (12K Bytes User Program)
IC693CPU313LT 5-Slot Base With Turbo CPU in base (.6 msec), 1K Registers, (12K Bytes User Program) (LT)
IC693CPU323 10-Slot Base With Turbo CPU in base (.6 msec) 12K bytes User Program
IC693CPU323LT 10-Slot Base With Turbo CPU in base (.6 msec) 12K bytes User Program (LT)
IC693CPU331 CPU 331 Module (16K Bytes)
IC693CPU331LT CPU 331 Module (16K Bytes) (LT)
IC693CPU340 CPU 340 Module (32K Bytes user memory), 10K Registers, .3 msec/K
IC693CPU341 CPU 341 Module (80K Bytes user memory), 10K Registers, .3 msec/K
IC693CPU350 CPU 350 Module (32K Bytes user memory, 4K I/O, 8 Racks), no built-in Serial Ports .22msec/K
IC693CPU350LT CPU 350 Module (32K Bytes user memory, 4K I/O, 8 Racks), no built-in Serial Ports .22msec/K (LT)
IC693CPU351 CPU 351 Module (240K Bytes configurable user memory, 4K I/O, 8 Racks) two built-in Serial Ports .22msec/K
IC693CPU352 CPU 352 Module (240K Bytes configurable user memory, 4K I/O, 8 Racks, Hardware FLOATING POINT MATH), two built-in Serial Ports .22msec/K
IC693CPU352LT CPU 352 Module (240K Bytes configurable user memory, 4K I/O, 8 Racks, Hardware FLOATING POINT MATH), two built-in Serial Ports .22msec/K (LT)
IC693CPU360 CPU 360 Module (240K Bytes configurable user memory, 4K I/O, 8 Racks), no built-in Serial Ports .22msec/K
IC693CPU360CA Series 90-30 CPU360 with Conformal Coated.
IC693CPU360LT CPU 360 Module (240K Bytes configurable user memory, 4K I/O, 8 Racks), no built-in Serial Ports .22msec/K (LT)
IC693CPU363 CPU 363 Module (240K Bytes configurable user memory)
IC693CPU363LT CPU 363 Module (240K Bytes configurable user memory) (LT)
IC693CPU364 CPU 364 Module (240K Bytes configurable user memory), Embedded Ethernet
IC693CPU366 CPU 366 Module (240K Bytes configurable Supports Profibus DP Master (Version 1 supported). One Profibus port and one RS-232 service port.
IC693CPU367 CPU 367Module (240K Bytes configurable Supports Profibus DP Slave (Version 1 supported). One Profibus port and one RS-232 service port.
IC693CPU374 CPU 374 Module (240K Bytes configurable user memory) The battery for the CPU is now included in the CPU backplane box, Embedded Ethrnet 10/100Mbs w/built-in switch. No serial ports.
IC693CPU374CA Series 90-30 CPU374 Conformal Coated.
IC693CPU500 Series 90-30 Cscape CPU supports 1,024 I/O. The processor can be programmed the same as the OCS products over the built-in network that supports CsCAN or DeviceNet Slave.
IC693CSE311 Series 90-30 5-Slot State Logic CPU in base Model 311
IC693CSE313 Series 90-30 5-Slot State Logic CPU in base Model 313
IC693CSE323 Series 90-30 10-Slot State Logic CPU in base Model 323
IC693CSE331 Series 90-30 Modular State Logic CPU 331
IC693CSE340 Series 90-30 Modular State Logic CPU 340
IC693DNM200 DeviceNet Master
IC693DNS201 DeviceNet Slave
IC693DSM302 Series 90-30 Motion Mate DSM302 Motion Controller, 2 Axis
IC693DSM314 Series 90-30 DSM314 Motion Controller, 1-4 axis
IC693DSM324 DSM324i 4-axis motion controller for the Series90-30
IC693LBR301 90-30 Documentation Library (paper manuals covering most options)
IC693MAR590 Mixed I/O, 120Vac Input (8 points), Relay Output (8 points)
IC693MAR590LT Mixed I/O, 120Vac Input (8 points), Relay Output (8 points) (LT)
IC693MCD001 Demo case, Beta Series Servo
IC693MCM001 Series 90-30 Digital Servo Interface Module
IC693MDL230 120 Vac Isolated Input (8 Points)
IC693MDL230LT 120 Vac Isolated Input (8 Points) (LT)
IC693MDL231 240 Vac Isolated Input (8 Points)
IC693MDL231LT 240 Vac Isolated Input (8 Points) (LT)
IC693MDL240 120 Vac Input (16 Points)
IC693MDL240LT 120 Vac Input (16 Points) (LT)
IC693MDL241 24 Vac/Vdc Input (16 Points)
IC693MDL241LT 24 Vac/Vdc Input (16 Points) (LT)
IC693MDL250 120 Vac Isolated Input (16 points). Module requires a terminal block IC694TBBx32 or IC693TBSx32).
IC693MDL260 32 Point 120VAC Input Module. Requires terminal block IC694TBxx32.
IC693MDL310 120 Vac Output, 0.5 Amp (12 Points)
IC693MDL330 120/240 Vac Output, 2 Amp (8 Points)
IC693MDL330LT 120/240 Vac Output, 2 Amp (8 Points) (LT)
IC693MDL340 120 Vac Output, 0.5 Amp (16 Points)
IC693MDL340LT 120 Vac Output, 0.5 Amp (16 Points) (LT)
IC693MDL350 120/240 Vac Isolated Output, 2 Amp (16 Points). Module requires a terminal block (IC694TBBx32 or IC693TBSx32).
IC693MDL390 120/240 Vac Isolated Output, 2 Amp (5 Points)
IC693MDL390LT 120/240 Vac Isolated Output, 2 Amp (5 Points) (LT)
IC693MDL632 125 Vdc Input (8 Points)
IC693MDL632LT 125 Vdc Input (8 Points) (LT)
IC693MDL634 24 Vdc Input, Negative/Positive Logic (8 Points)
IC693MDL634LT 24 Vdc Input, Negative/Positive Logic (8 Points) (LT)
IC693MDL645 24 Vdc Input, Neg/Pos Logic (16 Points)
IC693MDL645LT 24 Vdc Input, Neg/Pos Logic (16 Points) (LT)
IC693MDL646 24 Vdc Input, Neg/Pos Logic, 1 msec Filter (16 points)
IC693MDL646LT 24 Vdc Input, Neg/Pos Logic, 1 msec Filter (16 points) (LT)
IC693MDL648 48VDC Input, Neg/Pos Logic, 1 msec filter, Neg/Pos Logic (16 points)
IC693MDL653 24 Vdc Input, Neg/Pos Logic, 2msec Filter (32 Points)
IC693MDL654 5/12 Vdc (TTL) Input, Neg/Pos Logic, (32 points)
IC693MDL654LT 5/12 Vdc (TTL) Input, Neg/Pos Logic, (32 points) (LT)
IC693MDL655 24 Vdc Input, Neg/Pos Logic, 1 ms, (32 pts)
IC693MDL655LT 24 Vdc Input, Neg/Pos Logic, 1 ms, (32 pts) (LT)
IC693MDL660 24VDC Input Module 32 point. The module requires a terminal block (IC694TBB032 box style or IC694TBS032 springclamp style terminal block).Terminal block is sold seperately.
IC693MDL730 12/24 Vdc Output, 2 Amp, Positive Logic (8 Points)
IC693MDL730LT 12/24 Vdc Output, 2 Amp, Positive Logic (8 Points) (LT)
IC693MDL731 12/24 Vdc Output, 2 Amp, Negative Logic (8 Points)
IC693MDL731LT 12/24 Vdc Output, 2 Amp, Negative Logic (8 Points) (LT)
IC693MDL732 12/24 Vdc Output, 0.5 Amp, Positive Logic (8 Points)
IC693MDL733 12/24 Vdc Output, 0.5 Amp, Negative Logic (8 Points)
IC693MDL734 125 Vdc Output, (6 Points)
IC693MDL734LT 125 Vdc Output, (6 Points) (LT)
IC693MDL740 12/24 Vdc Output, 0.5 Amp, Positive Logic (16 Points)
IC693MDL740LT 12/24 Vdc Output, 0.5 Amp, Positive Logic (16 Points) (LT)
IC693MDL741 12/24 Vdc Output, 0.5 Amp, Negative Logic (16 Points)
IC693MDL741LT 12/24 Vdc Output, 0.5 Amp, Negative Logic (16 Points) (LT)
IC693MDL742 12/24 Vdc Output, 1 Amp, Positive Logic (16 Points), Fused
IC693MDL742LT 12/24 Vdc Output, 1 Amp, Positive Logic (16 Points), Fused (LT)
IC693MDL748 48VDC Output, 0.5 Amps, Positive Logic (8 points)
IC693MDL750 12/24 Vdc Output, Negative Logic (32 Points)
IC693MDL751 12/24 Vdc Output, Positive Logic (32 Points)
IC693MDL752 5/12/24 Vdc (TTL) Output, Neg Logic, (32 points)
IC693MDL752LT 5/12/24 Vdc (TTL) Output, Neg Logic, (32 points) (LT)
IC693MDL753 12/24 Vdc Output, Pos Logic (32 Pts)
IC693MDL753LT 12/24 Vdc Output, Pos Logic (32 Pts) (LT)
IC693MDL754 12/24VDC Output (0.75 amps per point) Module 32 point. The module requires a terminal block (IC694TBB032 box style or IC694TBS032 spring clamp style terminal block).
IC693MDL760 Solenoid Valve Output (11 Points)/ 24VDC Output ,0.5 Amp, Positive Logic (5 Points)
IC693MDL930 Relay Output, Isolated, 4 Amp (8 Points)
IC693MDL930LT Relay Output, Isolated, 4 Amp (8 Points) (LT)
IC693MDL931 Relay Output, 8 Amp Form B/C contacts, Isolated in groups of 4
IC693MDL931LT Relay Output, 8 Amp Form B/C contacts, Isolated in groups of 4 (LT)
IC693MDL940 Relay Output, 2 Amp (16 Points)
IC693MDL940LT Relay Output, 2 Amp (16 Points) (LT)
IC693MDR390 Mixed I/O, 24Vdc Input (8 points), Relay Output (8 points)
IC693MDR390LT Mixed I/O, 24Vdc Input (8 points), Relay Output (8 points) (LT)
IC693MLX000 Series 90-30 I/O Modules Label Kit (various quantities)
IC693NIU004 Series 90-30 Ethernet NIU (Ethernet I/O)
IC693NIU004CA Series 90-30 Ethernet NIU Conformal Coated. 10/100Mbit Ethernet.
IC693PBM200 Profibus DP Master Module
IC693PBS201 Profibus DP Slave Module
IC693PCM300 Prog. Coproc. Mdl., 160 KB (35 KB Basic Prgm), w/Port Exp. Cbl.
IC693PCM300LT Prog. Coproc. Mdl., 160 KB (35 KB Basic Prgm), w/Port Exp. Cbl. (LT)
IC693PCM300LTMP Prog. Coproc. Mdl., 160 KB (35 KB Basic Prgm), w/Port Exp. Cbl. Modified for use by OEMs (LT)
IC693PCM300-MP Prog. Coproc. Mdl., 160 KB (35 KB Basic Prgm), w/Port Exp. Cbl. Modified for use by OEMs
IC693PCM301 Prog. Coproc. Mdl., 192 KB (47 KB Basic Prgm), w/Port Exp. Cbl.
IC693PCM301LT Prog. Coproc. Mdl., 192 KB (47 KB Basic Prgm), w/Port Exp. Cbl. (LT)
IC693PCM311 Prog. Coproc. Mdl., 640 KB (190 KB Basic Prgm), w/Port Exp. Cbl.
IC693PCM311LT Prog. Coproc. Mdl., 640 KB (190 KB Basic Prgm), w/Port Exp. Cbl. (LT)
IC693PIF301 PC/AT Interface (PCIF) to Series 90-30 I/O with software
IC693PIF350 Series 90-30 I/O PCI Bus interface board. Enables users to connect Series 90-30 I/O to a PCI interface board.
IC693PIF400 High Performance PC/AT Interface (PCIF) to Series 90-30 I/O with software
IC693PRG300 Hand Held Programmer (HHP) With Cable & Manual
IC693PTM100 Power Transducer Module (Includes module, interface, 0.5m cable)
IC693PTM101 Power Transducer Module (includes module, interface, 1m cable)
IC693PWR321 Power Supply, 120/240 Vac, 125 Vdc, Standard
IC693PWR321LT Power Supply, 120/240 Vac, 125 Vdc, Standard (LT)
IC693PWR322 Power Supply, 24/48 Vdc, Standard
IC693PWR322LT Power Supply, 24/48 Vdc, Standard (LT)
IC693PWR328 Power Supply, 48 Vdc, Standard
IC693PWR328LT Power Supply, 48 Vdc, Standard (LT)
IC693PWR330 Power Supply, 120/240 Vac, 125 Vdc, High Capacity
IC693PWR331 Power Supply, 24 Vdc, High Capacity
IC693PWR332 Power Supply, 12 Vdc input, 30-watt output, High Capacity