Fanuc 2 AXIS ALPHA i SERVO MODULE DRIVER A06B-6114-H207 AC Servo Amplifier NEW SVM2-40/40 i

 

 

Quick Details:

 

Brand:Fanuc

Country of Origin: Japan

Model:A06B-6114-H207

Rated Input:283-339V

Rated Output Current:13A

Rated Output:240V

Condition:NEW

 

 

Description:

 

This A06B-6114-H207 servo amplifier module and FANUC brand is available in stock.This 2-axis drive belongs to the Alpha I servo αiSVM2 range. SVM2-40/40i. HRV3 – Input: 283-339V, Power 9kW Output: 240V ~ 2x13A (L&M axis) This servo amplifier module A06B-6114-H207 Fanuc is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

 

The servo amplifier αi series employs a modular structure, and is thinner, conserves more space, outputs less heat, and saves more energy.

Use of a latest low-loss power device and a newly developed highly-efficient radiator makes it possible to reduce the depth of the fin to 100 mm, therefore reducing the depth of the amplifier.

 

The width of the amplifier is reduced, and therefore the amplifier requires an average of approximately 30% smaller installation space in the cabinet than the conventional amplifiers.

 

The shape of the cable connector is improved to reduce the length of cable projection into the control board.

 

Amplifiers can be connected with one cable.

 

A ground connection from the motor output terminal block to the flange is included, so external cabling for this connection is no longer required. (A connection from the top of the flange to the system ground on the control board is required.)

 

Connectors are attached to input power lines and motor power lines. (For the large-capacity models, terminal blocks are used.) The time required for power line attachment to and detachment from the servo amplifier cabinet is substantially reduced.

 

A fan motor can now be replaced in an instant manner, so that the time required to replace a fan motor is reduced substantially.

 

Connectors are attached to input power lines and motor power lines, so that the time required for servo amplifier replacement is reduced substantially.

 

The need to perform reference position return operation after servo amplifier replacement is eliminated.

 

The servo amplifier αi series has a built-in backup capacitor in the Absolute Pulsecoder as standard. The capacitor enables absolute position detection operation for about 10 minutes, so that reference position return operation after servo amplifier or feedback cable replacement is unnecessary.

 

 

FANUC SERIES ALPHA-i SERVO AMPLIFIER MODULE

 

Model	Order Specification
SVM1-20 i	A06B-6114-H103
SVM1-40 i	A06B-6114-H104
SVM1-80 i	A06B-6114-H105
SVM1-160 i	A06B-6114-H106
SVM2-4/4 i	A06B-6114-H201
SVM2-20/20 i	A06B-6114-H205
SVM2-20/40 i	A06B-6114-H206
SVM2-40/40 i	A06B-6114-H207
SVM2-40/80 i	A06B-6114-H208
SVM2-80/80 i	A06B-6114-H209
SVM2-80/160 i	A06B-6114-H210
SVM2-160/160 i	A06B-6114-H211
SVM3-4/4/4 i	A06B-6114-H301
SVM3-20/20/20 i	A06B-6114-H303
SVM3-20/20/40 i	A06B-6114-H304

 

 

The FANUC servo amplifier αi series consists of the units andcomponents listed below:

 

(1) Power supply module (PSM)(basic)
(2) Servo amplifier module (SVM)(basic)
(3) Spindle amplifier module (SPM)(basic)
(4) AC reactor(basic)
(5) Connectors (for connecting cables)(basic)
(6) Fuses(option)
(7) Power transformer(option)

 

 

FANUC Servo Amplifier

 

 

 

αi-B series SERVO is the intelligent servo system having the very wide line-up, suitable for all kinds of machine tools.

 

The high resolution encoders and the latest SERVO and SPINDLE HRV Control realize Nano Control Servo system with high speed, high precision and high efficiency.

 

 

 

Function

 

High Speed, High Precision and High Efficiency Nano Control Servo