1KW Mitsubishi Electric Servo Amplifier MR-E-100A-KH003 3 phase servo motor driver NEW

 

 

 

Specifications

 

• MITSUBISHI AC SERVO
• Model:MR-E-100A-KH003
• Power:1kW
• Input:2.0A 3PH+1PH200-230V 50Hz
• 3PH+1PH200-230V 60Hz
• Output:170V 0-360Hz 6.0A

 

 

Combination with servo motor

 

The following table lists combinations of servo amplifiers and servo motors. The same combinations apply to the servo motors with an electromagnetic brake. HF-KN/HF-SN servo motor is available for the servo amplifier with software version A9 or later.

 

Servo Amplifier	Servo Motors	Servo Motors
MR-E Series	HF-KN-(J)	HF-SN–J
MR-E-10A-KH003	HF-KN13 / HF-KN13J	–
MR-E-20A-KH003	HF-KN23 / HF-KN23J	–
MR-E-40A-KH003	HF-KN43 / HF-KN43J	–
MR-E-70A-KH003	HF-KN73 / HF-KN73J	HF-SN52J
MR-E-100A-KH003	–	HF-SN102J
MR-E-200A-KH003	–	HF-SN152J/HF-SN202J

 

 

 

Introduction

 

The Mitsubishi general-purpose AC servo MR-E Super has position control and internal speed control modes. It can perform operation with the control modes changed, e.g. position/internal speed control. Hence, it is applicable to wide range of fields such as precision positioning and smooth speed control of machine tools and general industrial machines. As this new series has the RS-232C or RS-422 serial communication function, a MR Configurator (servo configuration software)-installed personal computer or the like can be used to perform parameter setting, test operation, status display monitoring, gain adjustment, etc. With real-time auto tuning, you can automatically adjust the servo gains according to the machine. The MR-E Super servo motor is equipped with an incremental position encoder that has the resolution of 131072 pulses/rev to ensure high precision positioning.

 

 

 

Control mode

 

 

 

(1) Position control mode

 

An up to 1Mpps high-speed pulse train is used to control the speed and direction of a motor and execute precision positioning of 131072 pulses/rev resolution. The position smoothing function provides a choice of two different modes appropriate for a machine, so a smoother start/stop can be made in response to a sudden position command. A torque limit is imposed on the servo amplifier by the clamp circuit to protect the power transistor in the main circuit from overcurrent due to sudden acceleration/deceleration or overload. This torque limit value can be changed to any value with the parameter.

 

 

(2) Internal speed control mode

 

The parameter-driven internal speed command (max. 7 speeds) is used to control the speed and direction of a servo motor smoothly. There are also the acceleration/deceleration time constant setting in response to speed command, the servo lock function at a stop time.

 

 

 

Mitsubishi MR-J2S Series Servo Drive

 

MR-J2S-10A	MR-J2S-10B	MR-J2S-10CP	MR-J2S-10CL
MR-J2S-20A	MR-J2S-20B	MR-J2S-20CP	MR-J2S-20CL
MR-J2S-40A	MR-J2S-40B	MR-J2S-40CP	MR-J2S-40CL
MR-J2S-60A	MR-J2S-60B	MR-J2S-60CP	MR-J2S-60CL
MR-J2S-70A	MR-J2S-70B	MR-J2S-70CP	MR-J2S-70CL
MR-J2S-100A	MR-J2S-100B	MR-J2S-100CP	MR-J2S-100CL
MR-J2S-200A	MR-J2S-200B	MR-J2S-200CP	MR-J2S-200CL
MR-J2S-350A	MR-J2S-350B	MR-J2S-350CP	MR-J2S-350CL
MR-J2S-500A	MR-J2S-500B	MR-J2S-500CP	MR-J2S-500CL
MR-J2S-700A	MR-J2S-700B	MR-J2S-700CP	MR-J2S-700CL
MR-J2S-11KA	MR-J2S-11KB	MR-J2S-10CP1	MR-J2S-10CL1
MR-J2S-15KA	MR-J2S-15KB	MR-J2S-20CP1	MR-J2S-20CL1
MR-J2S-22KA	MR-J2S-22KB	MR-J2S-40CP1	MR-J2S-40CL1
MR-J2S-30KA	MR-J2S-30KB	MR-J2S-10CP-S084	MR-HP30KA
MR-J2S-37KA	MR-J2S-37KB	MR-J2S-20CP-S084	MR-HP55KA4
MR-J2S-60A4	MR-J2S-60B4	MR-J2S-40CP-S084	MR-J2S-100A4
MR-J2S-100B4	MR-J2S-200B4	MR-J2S-60CP-S084	MR-J2S-70CP-S084
MR-J2S-350A4	MR-J2S-200A4	MR-J2S-350B4	MR-J2S-100CP-S084
MR-J2S-500A4	MR-J2S-500B4	MR-J2S-200CP-S084	MR-J2S-700A4
MR-J2S-700B4	MR-J2S-350CP-S084	MR-J2S-11KA4	MR-J2S-11KB4
MR-J2S-500CP-S084	MR-J2S-15KA4	MR-J2S-15KB4	MR-J2S-700CP-S084
MR-J2S-22KA4	MR-J2S-22KB4	MR-J2S-10CP1-S084	MR-J2S-30KA4
MR-J2S-40CP1-S084	MR-J2S-45KA4	MR-J2S-45KB4	MR-J2S-55KA4
MR-J2S-30KB4	MR-J2S-20CP1-S084	MR-J2S-37KA4	MR-J2S-37KB4
MR-J2S-55KB4	MR-J2S-10A1	MR-J2S-10B1	MR-J2S-20A1
MR-J2S-20B1	MR-J2S-40A1	MR-J2S-40B1	MR-J2S Series

 

 

• All the Mitsubishi Parts are new and original with package.
• Warranty time: 180 or 360 days.

Good Service in WTL:
 
> Please send your RFQ to get the latest price.
 
> Normally, we will ship the items in 1-2 weeks after receive the payment.
 
> We can ship to you by UPS/DHL//EMS/Fedex. Please contact us and we will use your preferred ways.
 
> We have a large stock and the prices are variable, so sometimes the prices we post are not accurate. If needed, please contact us for specific prices.
 

 Liability: