Ge Fanuc IC660EBD101 , Electronic Low-Leakage I/O Block , 16 W With 8 Inputs

Technical Information

The GE Fanuc IC660EBD101 block is an electronic low-leakage I/O block and it belongs to the GE Genius I/O series. This module runs on 115 Volts AC and it is designed to interface the discrete actuators and sensors in a system to a communication bus. It features 8 matching circuits rated at 115 Volts AC, with each circuit usable as an output or input. Some features of the IC660EBD101 I/O block are bus switching module control, output powerup defaults, and pulse testing for output. It also features monitoring for the output feedback, a selectable input-filter time of 10 to 100 milliseconds, and an output hold last state or default feature. This block taps its control power from the I/O device voltages connected to the terminal and it requires no separate source of power. Each circuit has electronic fusing that is intended for shutting down the circuit in 5 microseconds when the output current surpasses 30 Amps with the output in the on state. This circuit can be restored by a command through the CPU or a hand-held monitor.

The GE Fanuc Genius I/O IC660EBD101 I/O block is compatible with the hand-held monitor known as the GE Fanuc HMM501 hand-held monitor. This block operates in a temperature of between 0 and 60 degrees Celsius and it has a non-operational or storage temperature range from -40 to 100 degrees Celsius. It also features a tolerable humidity range of 5 to 95 percent, non-condensing. Other properties of this module are 1500 Volts of block to block isolation, a standby power rating of 8.5 Watts, a voltage rating of 93 to 132 Volts AC, and a frequency rating of 47 to 63 Hertz. The IC660EBD101 I/O block has an approximate weight of 4 pounds and it has dimensions of 8.83 x 3.34 x 3.91 inches.

About IC660EBD101

The GE Fanuc IC660EBD101 electronics assembly is a product of GE Intelligent Platforms/GE Fanuc Automation. It belongs to the Genius I/O block series and it has 8 circuits comprised of both inputs and outputs. The block has approximate dimensions of 8.83 x 3.50 x 3.94 inches and a weight of about 4 pounds. It also has “I/O Enabled” and “Unit OK” LEDs, as well as LED indicators on every circuit on the logic side of the switch and a 1500 Volts block-to-block isolation voltage rating with 16 Watts of heat dissipation with 8 inputs or 43 Watts of heat dissipation with 8 outputs at a current rating of 2 Amps. The standby power for all the block inputs and outputs off is 8.5 Watts, and the IC660EBD101 electronics assembly block comes with 93 to 132 Volts AC single-source operating voltage with a 47 to 63-Hertz frequency range.

Other specifications of the IC660EBD101 electronics assembly block include an operating temperatures range from 0 to 60 degrees Celsius and a storage temperature range of -40 to 100 degrees Celsius. This block has a vibration rating of 5 to 10 Hertz and it can tolerate 5 to 95 percent non-condensing humidity. The GE Fanuc IC660EBD101 electronics assembly block has 8 circuits arranged in isolated groups and rated at a voltage of 115 Volts AC nominal. When any of the circuits are configured as an input, this circuit’s LED indicator shows the threshold voltage that is present at the input terminal. On the other hand, when any circuit is configured as an output, the indicator shows the condition that is commanded by the CPU.

for IC660EBD101