Bộ điều khiển OMRON AC Servo driver Pulse Train Inputs Single-Phase R7D-BP02HH controller original
OMRON AC Servo driver Pulse Train Inputs Single-Phase R7D-BP02HH controller original
Servo Drive Specifications (R7D-BP)
General Specifications
| Item | Specifications | ||
|---|---|---|---|
| Ambient operating temperature Ambient operating humidity |
0 to 55 °C, 90% max. (with no condensation) | ||
| Ambient storage temperature Ambient storage humidity |
-20 to 65 °C, 90% max. (with no condensation) | ||
| Storage and operating atmosphere | No corrosive gasses, no dust, no iron dust, no exposure to moisture or cutting oil |
||
| Vibration resistance | 10 to 60 Hz; acceleration: 5.9 m/s2 (0.6 G) max. | ||
| Impact resistance | Acceleration of 19.6 m/s2 max. 3 times each in X, Y, and Z directions. | ||
| Insulation resistance | Between power supply/power line terminals and frame ground: 0.5 MΩ. min. (at 500 VDC) |
||
| Dielectric strength | Between power supply/power line terminals and frame ground: 1,500 VAC for 1 min at 50/60 Hz Between each control signal and frame ground: 500 VAC for 1 min |
||
| Altitude | 1,000 m above sea level max. (860 hp min.) | ||
| Degree of protection | Built into panel (IP10). | ||
| International standards |
EC Directives |
EMC Directive | EN 55011 class A group 1 EN 61000-6-2 |
| Low Voltage Directive |
EN 50178 | ||
| UL standards | UL 508C | ||
| cUL standards | cUL C22.2 No.14 | ||
| Korean Radio Regulations (KC) |
Certified | ||
Note: 1. The above items reflect individual evaluation testing. The results may differ under compound conditions.
Note: 2. Always disconnect all connections to the Servo Drive before you perform insulation resistance tests on it. If you
perform an insulation resistance test while the Servo Drive is connected, the Servo Drive may be damaged.
Never perform dielectric strength tests on the Servo Drive. Failure to follow this precaution may result in
damaging internal elements.
Note: 3. Depending on the operating conditions, some Servo Drive parts will require maintenance.
Note: 4. The service life of the Servo Drive is 50,000 hours at an average ambient temperature of 40°C at 80% of the
rated torque (excluding axial-flow fan).
Note: 2. Always disconnect all connections to the Servo Drive before you perform insulation resistance tests on it. If you
perform an insulation resistance test while the Servo Drive is connected, the Servo Drive may be damaged.
Never perform dielectric strength tests on the Servo Drive. Failure to follow this precaution may result in
damaging internal elements.
Note: 3. Depending on the operating conditions, some Servo Drive parts will require maintenance.
Note: 4. The service life of the Servo Drive is 50,000 hours at an average ambient temperature of 40°C at 80% of the
rated torque (excluding axial-flow fan).
200 VAC specification
| Item | Servo Drive model | |||
|---|---|---|---|---|
| R7D-BP01H | R7D-BP02HH | R7D-BP02H | R7D-BP04H | |
| Continuous output current (rms) | 1.0 A | 1.6 A | 1.6 A | 2.5 A |
| Momentary maximum output current (rms) | 3.3 A | 4.9 A | 4.9 A | 7.8 A |
| Power supply capacity | 0.27 KVA (0.30 KVA) * |
0.35 KVA | 0.42 KVA | 0.69 KVA (0.77 KVA) * |
| Input power supply voltage (main circuit) | Both single-phase and three-phase 200 to 240 VAC (170 to 264 V), 50/60 Hz |
|||
| Input power supply current (rms) (main circuit) |
0.7 A (1.5 A) * |
1.6 A | 1.1 A | 1.8 A (3.5 A) * |
| Heat generated (main circuit) | 14 W | 16 W | 20 W | 26W |
| Control method | All-digital servo | |||
| Inverter method | IGBT-driven PWM method | |||
| PWM frequency | 12 kHz | 6 kHz | ||
| Maximum response frequency (command pulses) |
Line drive: 500 kpps, Open collector: 200 kpps | |||
| Weight | 0.35 kg | 0.42 kg | 0.35 kg | 0.42 kg |
| Applicable motor capacity | 100 W | 200 W | 200 W | 400 W |
Similar Model Products
| Specifications | Model | |
|---|---|---|
| Single-phase 100 VAC | 50 W | R7D-BPA5L |
| 100 W | R7D-BP01L | |
| 200 W | R7D-BP02L | |
| Single-phase/three-phase 200 VAC | 50 W | R7D-BP01H |
| 100 W | ||
| 400 W | R7D-BP04H | |
| Single-phase 200 VAC | 200 W | R7D-BP02HH |
| Three-phase 200 VAC | 200 W | R7D-BP02H |
About US:
