GE FANUC IC694MDL940 16-POINT 2 AMP RELAY OUTPUT MODULE 24 VOLTS DC

 

Product Description:

The IC694MDL940 is a 16-Point, 2 Amp, Relay Output module from the GE Fanuc RX3i Series. See specifications for this unit on IC694MDL940’s website page.

 

Rated Voltage:	24 volts DC, 120/240 volts AC
# of Outputs:	16 (4 groups of 4 outputs)
Freq:	50/60Hz (A/C only)
Output Current:	2A per point, 4A per common
Output Voltage Range:	5 to 30VDC, 5 to 250 VAC
Power Consumption:	7mA from 5V bus, 135mA from 24V relay

 

Product Description

 

The IC694MDL940 output module is a GE Fanuc 16-point relay output module. This output controller module is used with the RX3i PACSystems modules. It is powerful and is available with several useful features. It is used for controlling output loads. It has a current rating of 2 Amps for output switching. It is a RX3i series module and it is manufactured for industrial use. It is powered with a voltage rating of 24 Volts DC or 120/240 Volts AC. The number of outputs is 16 and they are arranged in 4 groups. The operating frequency for the AC voltage supply is 50/60 Hertz. The output voltage range lies between 5 and 30 Volts DC or 5 and 250 Volts AC. It has a current consumption rating of 7 milliamps with 5 Volts bus voltage, and 135 milliamps with 24 Volts relay voltage.

The front of the IC694MDL940 output module has LED indicators to show the on/off status of each output point. No fuses are present in this high-voltage module. An isolation voltage of 250 Volts AC is present between the field and frame and there is an isolation voltage of 1500 Volts AC between the backplane and frame ground in the IC694MDL940 output module. The module can take a maximum load of 2 Amps of pilot duty current per output and a load of 4 Amps maximum per common. The minimum load required is 10 milliamps and the maximum inrush current rating is 5 Amps. The IC694MDL940 output module can be configured by using the Proficy Machine Edition programming software. The operating temperature should be set between 0 and 60 degrees Celsius.

Common misspellings:

• 1C694MDL940
• IC69AMDL940
• IC694MD1940
• IC694MDL9A0
• IC694MDL94o
• IC694MDL940

 

Technical Information

Rated Voltage	24 volts DC, 120/240 VAC (nominal – see the following table for exceptions)
Operating Voltage	5 to 30 volts DC 5 to 250 VAC, 50/60 Hz
Outputs per Module	16 (four groups of four outputs each)
Isolation:
Field to Backplane and to Frame Ground	250 VAC continuous; 1500 VAC for 1 minute
Point to Point	250 VAC continuous; 1500 VAC for 1 minute
Maximum Load	2 Amps pilot duty maximum per output 4 Amps maximum per common 16 amps maximum per module
Minimum Load	10mA
Maximum Inrush	5 Amps
On Response Time	15ms maximum1
Off Response Time	15ms maximum1
Power Consumption, all outputs on	7mA from 5 volt bus on backplane 135mA from relay 24V bus on backplane
1 When this module is used with DC power supply IC695PSD040 or PSD140, special precautions should be taken because dropouts in the source voltage will be seen by this module and may cause relay dropouts.

 

 

 

Introductionof Technology CO.,LTD

1.
2.
3.

.

 

1.
2.
3.