Mô đun AI880A ABB 3BSE039293R1 Digital I O Module High Integrity Analog Input ABB
đại lý AI880A | nhà phân phối AI880A
AI880A ABB 3BSE039293R1 Digital I O Module High Integrity Analog Input ABB
General info
|
Type |
Analog Input |
|
Signal specification |
0..20 mA, 4..20 mA |
|
Article number |
3BSE039293R1 |
|
Number of channels |
8 |
|
Signal type |
Unipolar single ended |
|
HART |
Yes |
|
SOE |
No |
|
Redundancy |
Yes |
|
High integrity |
Yes |
|
Intrinsic safety |
No |
|
Mechanics |
S800 |
The AI880A High Integrity Analog Input Module is designed for single and redundant configuration. The module has 8 current input channels. The input resistance is 250 ohm.
The module distributes the external transmitter supply to each channel. This adds a simple connection to distribute the supply to 2- or 3-wire transmitters. The transmitter power is supervised and current limited. All eight channels are isolated from the ModuleBus in one group. Power to the Module is generated from the 24 V on the ModuleBus.
The AI880A complies with the NAMUR recommendation NE43, and supports configurable over- and under range limits.
Features and benefits
-
8 channels for 0…20 mA, 4…20 mA, single ended unipolar inputs
-
Single or redundant configuration
-
1 group of 8 channels isolated from ground
-
12 bit resolution
-
Loop Supervised DI function
-
Configurable alarm limit for field power outputs
-
Configurable over/under range for current inputs
-
Current limited transmitter supply per channel
-
Advanced on-board diagnostics
-
Certified for SIL3 according to IEC 61508
-
Certified for Category 4 according to EN 954-1
-
Complies with the NAMUR recommendation NE43, and supports configurable over- and under range limits
-
HART pass-through communication (AI880A)
| Resolution | 12 bit |
| Input impedance | 250 Ω with shunt stick TY801 (at current input) |
| Isolation | Groupwise isolated from ground |
| Under/over range | Over range: +12% (0..20 mA), +15% (4..20 mA) |
| Error | Max. 0.1% |
| Temperature drift | Max. 50 ppm/°C |
| Input filter (rise time 0-90%) | 190 ms (HW filter) |
| Update cycle time | 10 ms |
| Current limiting | Built in current limited transmitter power |
| Maximum field cable length | 600 meters (656 yards) |
| Max input voltage (non destructive) | 11 V d.c. |
| NMRR, 50Hz, 60Hz | > 40 dB |
| Rated insulation voltage | 50 V |
| Dielectric test voltage | 500 V a.c. |
| Power dissipation | 2.4 W |
| Current consumption +5 V Modulebus | 45 mA |
| Current consumption +24 V Modulebus | max 50 mA |
| Current consumption +24 V external | 4 + transmitter current mA, max 260 mA |
| Front LED’s | F(ault), R(un), W(arning) |
| Supervision | Internal voltage, Field power input, Field power output per channel |
| Status indication of supervision | Module error, Module Warning, Channel error |
| CE mark | Yes |
| Electrical safety | IEC 61131-2, UL 508 |
| Hazardous Location | C1 Div 2 cULus, C1 Zone 2 cULus, ATEX Zone 2 |
| Marine certification | ABS,BV,DNV-GL,LR,RS,CCS |
| Protection rating | IP20 according to IEC60529 |
| Corrosive atmosphere ISA-S71.04 | G3 |
| Climatic operating conditions | 0 to +55 °C (Storage -40 to +70 °C), RH=5 to 95 % no condensation, IEC/EN 61131-2 |
| Pollution degree | Degree 2, IEC 60664-1 |
| Mechanical operating conditions | IEC/EN 61131-2 |
| EMC | EN 61000-6-4 and EN 61000-6-2 |
| Overvoltage categories | IEC/EN 60664-1, EN 50178 |
| Equipment class | Class I according to IEC 61140; (earth protected) |
| Max ambient temperature | 55 °C (131 °F), for vertical mounting in compact MTU 40 °C (104 °F) |
| RoHS compliance | EN 50581:2012 |
| WEEE compliance | DIRECTIVE/2012/19/EU |
| Height | 119 mm (4.7”) |
| Width | 45 mm (1.77”) |
| Depth | 102 mm (4.01”), 111 mm (4.37”) including connector |
| Weight | 0.15 kg (0.33 lbs.) |
Contact:
similar item we can supply:
| 3BSE031155R1 | BC810K02 | 3BSE031150R1 | PM865K02 |
| 3BSE018103R1 | CI853K01 | 3BSE050198R1 | PM866K01 |
| 3BSE030220R1 | CI854AK01 | 3BSE050199R1 | PM866K02 |
| 3BSE018106R1 | CI855K01 | 3BSE053241R1 | PM891K01 |
| 3BSE026055R1 | CI856K01 | 3BSE053242R1 | PM891K02 |
| 3BSE018144R1 | CI857K01 | 3BSE018172R1 | SB822 |
| 3BSE018135R1 | CI858K01 | 3BSE018173R1 | SM811K01 |
| 3BSE032444R1 | CI860K01 | 3BSC950193R1 | TB850 |
| 3BUA000037R1 | CI862K01 | 3BSC950194R1 | TB851 |
| 3BUA000111R1 | CI862K02 | 3BSC950263R1 | TB852 |
| 3BSE040795R1 | CI865K01 | 3BSE057022R1 | TB853 |
| 3BSE043660R1 | CI867K01 | 3BSC630049R1 | TC562 |
| 3BSE048845R1 | CI868K01 | 3BSC630197R1 | TK212A |
| 3BSE056767R1 | CI871K01 | 3BSC950192R1 | TK850V007 |
| 3BSE051129R1 | CI872K01 | 3BSC950262R1 | TK851V010 |
| 3BSE056899R1 | CI873K01 | 3BSC950201R1 | TK853V020 |
| 3BSE066485R1 | PM851AK01 | 3BSC950356R1 | TK855 |
| 3BSE066490R1 | PM856AK01 | 3BSE057021R1 | TK856 |
| 3BSE066495R1 | PM860AK01 | 3BSE049110R1 | 800xA |
| 3BSE018157R1 | PM861AK01 | 3BSE020512R1 | AI801 |
| 3BSE018160R1 | PM861AK02 | 3BSE008516R1 | AI810 |
| 3BSE018161R1 | PM864AK01 | 3BSE052604R1 | AI815 |
| 3BSE018164R1 | PM864AK02 | 3BSE008544R1 | AI820 |
| 3BSE031151R1 | PM865K01 | 3BSE036456R1 | AI825 |
Good Service in WTL:
> We offer high quality, fast delivery, competitive price for ABB Input Output Module.
> Please send your RFQ to get the latest price.
> Normally, we will ship the items in 1-2 weeks after receive the payment.
> We can ship to you by UPS/DHL//EMS/Fedex. Please contact us and we will use your preferred ways.
> We have a large stock and the prices are variable, so sometimes the prices we post are not accurate. If needed, please contact us for specific prices.
Liability:
WTL is not liable for any personal injury or property damage resulting from the use of this equipment. It is
buyer’s responsibility as to the safe handling & operation of this equipment and to verify equipment is
compliance to their machinery.
【Emerson】DeltaV Module / Servo Motor
【ABB】Input Output Module
【AB】Module / Touch Screen
【Rosemount】Pressure and Temperature Transmitter
【Yokogawa】Pressure Transmitter
【Yaskawa】Servo Drive / Servo Motor
【Mitsubishi】Servo Drive / Servo Motor
【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive
