Mô đun GE FANUC SERIES 90-30 PLC Digital I/O Module IC697CPM924 FACTORY SEALED New original
đại lý IC697CPM924 | nhà phân phối IC697CPM924
GE FANUC SERIES 90-30 PLC Digital I/O Module IC697CPM924 FACTORY SEALED
Product Description:
GE Fanuc Discrete input module for 90 – 30 series PLC offers 16 input points with one common power input terminal. It requires an AC power source for convenient operation. Module has LED indicators at the top to offer ON/OFF status of each point. Module has circuit wiring information on the surface towards the inside and circuit identification information on the outside surface. Module has a voltage rating of 120 VAC at 50/60 Hz, 0 – 132 VAC at 50/60 Hz, input current rating of 12 milli-Amps and a power rating of 90 milli-Amps at 5 VDC. It has a maximum ON response time of 30 milli-seconds and maximum OFF response time of 45 milli-seconds. Module is compatible with input devices such as pushbuttons, limit switches and electronic proximity switches. Input/output module provides the interface between the PLC and external input devices such as proximity sensors, push buttons, switches and BCD thumbwheels. It supports different voltage ranges, types, current capacity, isolation and response time to meet your application.
Product Details:
Input modules provide the interface between the PLC and external input devices such as proximity sensors, push buttons, switches and BCD thumbwheels. Output modules provide the interface between the PLC and external output devices such as contactors, interposing relays, BCD displays and indicator lamps. This module requires an AC power source, it cannot be used with a DC power source.
Product Summary:
- SNP/SNP-X Protocol: master, slave
- CCM Protocol: master, slave, peer
- RTU Modbus Protocol: slave only
- Description: Communication Coprocessor
- Simultaneous Communications: (up to 9.6 Kbps, or 19.2 Kbps individually
- User Maintenance Items: Restart Pushbutton – located immediately beneath the LEDs
- Two Serial Ports: Two 25-pin female connectors provide RS-232 and RS-422/RS-485 communication
- Type of Device: Communications Coprocessor, CCM, RTU, SNP, and SNPx Protocols
- SNP/SNP-X Protocol: master, slave
- CCM Protocol: master, slave, peer
- RTU Modbus Protocol: slave only
- Features: 12 Mhz, 80C186 Microprocessor, Three Status LEDs, Reset pushbutton
Related Product Recommendation:
| GE | VCIB-16A | GE | DS200CDBAG1ACA |
| GE | VMIVME-7671-421000 | GE | DS200DCFBG2BNC |
| GE | 269PLUS-100P-120 | GE | DS200FCRRG1AKD |
| GE | 369-HI-0-0-0-0 | GE | DS200LDCCH1ARA |
| GE | 369-HI-R-0-0-0 | GE | DS200LRPAG1AGF |
| GE | 531X111PSHAPG3 | GE | DS200PCCAG5ACB |
| GE | 531X113PSFARG1 | GE | DS200PCCAG9ACB |
| GE | 531X123PCHACG1 | GE | IC693DSM302 |
| GE | 531X139APMARM7 | GE | IC693MDL330 |
| GE | 531X303MCPBCG1 | GE | IC693MDL646 |
| GE | 531X305NTBACG1 | GE | IC693MDL655 |
| GE | 531X305NTBAPG1 | GE | IC693MDL730 |
| GE | IC200ALG322 | GE | IC693MDL752 |
| GE | IC200ALG620 | GE | IC693PBS105 |
| GE | IC200ALG630 | GE | IC693PCM301 |
| GE | IC200CHS002 | GE | IC200MDL742 |
| GE | IC200MDL740 | GE | IC200CPUE05 |
| GE | IC3600LTGA | GE | IC200PWR101 |
| GE | IC3600TUAA1 | GE | IC200PWR001 |
| GE | IC660BBD025 | GE | IC693PWR330 |
| GE | IC670MDL640 | GE | IC694APU300 |
| GE | IC670PBI001 | GE | IC694BEM331 |
| GE | IC693ACC310 | GE | IC694MDL645 |
| GE | IC693ALG223 | GE | IC694MDL655 |
| GE | IC693ALG390 | GE | IC694MDL740 |
The use of the product:
- / -19868929294
-
Tel: -755-Fax: -755-Address: 23E BlockB,Lushan Building, Road, District,,518001,
