GE FANUC SERIES 90-30 PLC Digital I/O Module IC693PRG300 FACTORY SEALED
 
 
 
 
Product Description:

GE Fanuc Discrete input module for 90 – 30 series PLC offers 16 input points with one common power input terminal. It requires an AC power source for convenient operation. Module has LED indicators at the top to offer ON/OFF status of each point. Module has circuit wiring information on the surface towards the inside and circuit identification information on the outside surface. Module has a voltage rating of 120 VAC at 50/60 Hz, 0 – 132 VAC at 50/60 Hz, input current rating of 12 milli-Amps and a power rating of 90 milli-Amps at 5 VDC. It has a maximum ON response time of 30 milli-seconds and maximum OFF response time of 45 milli-seconds. Module is compatible with input devices such as pushbuttons, limit switches and electronic proximity switches. Input/output module provides the interface between the PLC and external input devices such as proximity sensors, push buttons, switches and BCD thumbwheels. It supports different voltage ranges, types, current capacity, isolation and response time to meet your application.
 
 
 
 
Product Details:
 
Input modules provide the interface between the PLC and external input devices such as proximity sensors, push buttons, switches and BCD thumbwheels. Output modules provide the interface between the PLC and external output devices such as contactors, interposing relays, BCD displays and indicator lamps. This module requires an AC power source, it cannot be used with a DC power source.
 
 
 

• Description: Programmable Coprocessor 192K
• Cables – IC693CBL304/305: These Wye cables split out the two PCM port connections from the single connector on the front of the PCM modules. One of these cables is supplied with each PCM module. The IC693CBL304 is for the PCM300. The IC693CBL305 is for the PCM301 and PCM311.
• Cables – IC690CBL701/702/705: These cables provides a direct RS-232 connection between the PCM and various programmers? serial ports. These cables are not supplied with the PCM modules.
• Product Description: The Programmable Coprocessor Module (PCM) GE Fanuc 90-30 GEFIC693PCM301 is a high performance coprocessor for the Series 90-30 Modular CPUs. The PCM GE Fanuc 90-30 IC693PCM301 supports the Modbus RTU and GE Fanuc CCM protocols, as well as the MegaBasic and C programming languages. The PCM GE Fanuc 90-30 IC693PCM301 has two separate ports, both accessed on one front panel connector.

• Type of Device: Programmable Coprocessor Module, 192 Kbyte (47 Kbyte Basic Program), with Port Expansion Cable
• LED Indicator Lights – OK: Normally ON. Indicates the basic condition of the module.
• LED Indicator Lights – US1 and US2: By default, LED US1 flashes to indicate activity on Port 1, and LED US2 flashes to indicate activity on Port 2. Both LEDs stay OFF when there is no port activity. However, the function of these two LEDs can be custom configured by the user. Please see GFK-0255 for custom configuration details.
• Restart Pushbutton: Used to place the module in either the RUN mode or the PROGRAM mode.
• Memory Backup Battery: The Lithium battery for backup of RAM memory is installed in a battery mounting clip on the inside of the PCM faceplate.

Payment
Credit card on line is available.We also accept payment by P a y p a l,T/T and Western Union.
This item have stock,so can delivery to you within 3 business days after your payment cleared.If ther
is any import duties or taxes,it is the buyer’s responsibility.
 

• Tel: -755-
  Fax: -755-
  Address: 23E BlockB,Lushan Building, Road, District,,518001,