GE FANUC SERIES 90-30 PLC Digital I/O Module IC693MDL734 FACTORY SEALED
 
 
 
 
Product Description:

GE Fanuc Discrete input module for 90 – 30 series PLC offers 16 input points with one common power input terminal. It requires an AC power source for convenient operation. Module has LED indicators at the top to offer ON/OFF status of each point. Module has circuit wiring information on the surface towards the inside and circuit identification information on the outside surface. Module has a voltage rating of 120 VAC at 50/60 Hz, 0 – 132 VAC at 50/60 Hz, input current rating of 12 milli-Amps and a power rating of 90 milli-Amps at 5 VDC. It has a maximum ON response time of 30 milli-seconds and maximum OFF response time of 45 milli-seconds. Module is compatible with input devices such as pushbuttons, limit switches and electronic proximity switches. Input/output module provides the interface between the PLC and external input devices such as proximity sensors, push buttons, switches and BCD thumbwheels. It supports different voltage ranges, types, current capacity, isolation and response time to meet your application.
 
 
 
 
Product Details:
 
Input modules provide the interface between the PLC and external input devices such as proximity sensors, push buttons, switches and BCD thumbwheels. Output modules provide the interface between the PLC and external output devices such as contactors, interposing relays, BCD displays and indicator lamps. This module requires an AC power source, it cannot be used with a DC power source.
 
 
 
 
 

Product Summary:

• Rated Voltage: 12/24 volts DC
• Output Voltage Range: 12 to 24 volts DC (+20%, -15%)
• Outputs per Module: 8 (one group of eight outputs)
• Output Voltage Drop: 0.75 volts maximum
• Off-state Leakage: 1 mA maximum

• Description: 12/24 VDC Output Neg Logic 8-PT
• Off-state Leakage: 1 mA maximum
• On Response Time: 2 ms maximum
• Off Response Time: 2 ms maximum
• Power Consumption: 55 mA (all outputs on) from 5 volt bus on backplane
• Output Characteristics: The output characteristics are compatible with a wide range of user-supplied load devices, such as: motor starters, solenoids, and indicators.
• Product Description: The 12/24 volt DC Negative Logic 2 Amp Output module for the Series 90-30 Programmable Logic Controller provides 8 output points in one group with a common power output terminal. This output module is designed to have negative logic characteristics in that it sinks current from the loads to the user common or negative power bus.

• Type of Device: 12/24 Volt DC Negative Logic Output – 2 Amp, 8 Point
• Rated Voltage: 12/24 volts DC
• Output Voltage Range: 12 to 24 volts DC (+20%, -15%)
• Outputs per Module: 8 (one group of eight outputs)
• Isolation: 1500 volts between field side and logic side
• Output Current: 2 amps maximum per point; 4 amps maximum per fuse at 50 C (122 F); 2 amps maximum per fuse at 60 C (140 F)
• Output Voltage Drop: 0.75 volts maximum

Payment
Credit card on line is available.We also accept payment by P a y p a l,T/T and Western Union.
This item have stock,so can delivery to you within 3 business days after your payment cleared.If ther
is any import duties or taxes,it is the buyer’s responsibility.
 

• Tel: -755-
  Fax: -755-
   
   
  Address: 23E BlockB,Lushan Building, Road, District,,518001,