GE FANUC SERIES 90-30 PLC Digital I/O Module IC693MDL645 FACTORY SEALED
 
 
 
 
Product Description:
 
GE Fanuc Discrete input module for 90 – 30 series PLC offers 16 input points with one common power input terminal. It requires an AC power source for convenient operation. Module has LED indicators at the top to offer ON/OFF status of each point. Module has circuit wiring information on the surface towards the inside and circuit identification information on the outside surface. Module has a voltage rating of 120 VAC at 50/60 Hz, 0 – 132 VAC at 50/60 Hz, input current rating of 12 milli-Amps and a power rating of 90 milli-Amps at 5 VDC. It has a maximum ON response time of 30 milli-seconds and maximum OFF response time of 45 milli-seconds. Module is compatible with input devices such as pushbuttons, limit switches and electronic proximity switches. Input/output module provides the interface between the PLC and external input devices such as proximity sensors, push buttons, switches and BCD thumbwheels. It supports different voltage ranges, types, current capacity, isolation and response time to meet your application.
 
 
 
 
Product Details:
 
Input modules provide the interface between the PLC and external input devices such as proximity sensors, push buttons, switches and BCD thumbwheels. Output modules provide the interface between the PLC and external output devices such as contactors, interposing relays, BCD displays and indicator lamps. This module requires an AC power source, it cannot be used with a DC power source.
 
 
 
 
 
 

Product Summary:

• Rated Voltage: 24 Volts DC

• Input Voltage Range: 0 to +30 Volts DC

• Inputs per Module: 16 (one group with a single common)

• Input Current: 7 mA (typical) at rated voltage

• On-state Voltage: 11.5 to 30 volts DC

• Description: Input Module | Series 90-30

• Off-state Current: 1.1 mA maximum

• On response Time: 7 ms typical

• Off response Time: 7 ms typical

• Power Consumption: 5V: 80 mA (all inputs on) from 5 volt bus on backplane

• Power Consumption: 24V: 125 mA from the Isolated 24 volt backplane bus or from user supplied power

• Response Time: 7 ms On/Off

• UPC: 004810000007

• Product Description: GE Fanuc Discrete input module for 90 – 30 series PLC has either positive logic or negative logic characteristics. It offers 16 input points in one group with a common power input terminal. Module has LED indicators at the top to offer ON/OFF status of each point. Module has circuit wiring information on the surface towards the inside and circuit identification information on the outside surface. Module can be conveniently installed in any I/O slot in a 90-30 series PLC system. It has a voltage rating 0 – 30 VDC, current rating of 7 milli-Amps, power rating of 80 milli-Amps at 5 VDC and 125 milli-Amps at 24 VDC. Module has a maximum ON/OFF response time of 7 milli-seconds. It is compatible with input devices such as pushbuttons, limit switches and electronic proximity switches. Input/output module provides the interface between the PLC and external input devices such as proximity sensors, push buttons, switches and BCD thumbwheels. It supports different voltage ranges, types, current capacity, isolation and response time to meet your application.

• Type of Device: 24 Volt DC Positive/Negative Logic Input, 16 Point

• Rated Voltage: 24 Volts DC

• Input Voltage Range: 0 to +30 Volts DC

• Inputs per Module: 16 (one group with a single common)

• Isolation: 1500 volts between field side and logic side

• Input Current: 7 mA (typical) at rated voltage

• On-state Voltage: 11.5 to 30 volts DC

• Off-state Voltage: 0 to +5 volts DC

• On-state Current: 3.2 mA minimum

• Tel: -755-
  Fax: -755-
  Address: 23E BlockB,Lushan Building, Road, District,,518001,