Mô đun AB 1747-M2 , SLC 500 Memory Device , 64,000 Words , Processor PC Board
AB 1747-M2 , SLC 500 Memory Device , 64,000 Words
for 1747-M2
Manufacturer | Rockwell Automation |
Brand | AB |
Part Number/Catalog No. | 1747-M2 |
Series | SLC 500 |
Module Type | Memory Module |
Compatible Hardware Style | Fixed or Modular Hardware |
Compatible Processor | SLC 5/01; SLC 5/02; |
Memory | 32 kilobytes, 4,000 instructions |
User Memory | 64,000 Words |
Compatible Firmware Revisions | Any series |
Program Scan Time | 0.9 milliseconds |
Compatible Adapter | None required |
I/O Scan Time | 0.225 milliseconds |
Function | Program/Data Table Storage |
I/O Chassis | 3 |
Chassis Module Slots | 30 |
Memory size | 4 kilobytes |
Communication | Ethernet, RS-232 |
Configuration Software | RSLogix 500 |
Backup Memory | Flash |
Configuration Hardware | PROM Programmer |
Installation | Processor PC Board |
About 1747-M2
This module is sensitive to electrostatic discharge. It must be handled only from the edges and the the working area including must be free from oil and dirt. If the product is marked with CE, it depicts that the particular item complies with applicable directives.
This memory module has a specific jumper J1 settings when being mounted to the processor. It must be mounted only when the processor is without power.
Memory modules are added to provide a non-volatile memory type. By adding this type of memory, the processor is protected with unwanted deletion of the program as the integrated memory supplied with each processor is of Random-Access Memory (RAM) type. RAM memory type, similar to other electronic devices, lose the stored data when power is removed. This is also true with the SLC 500 processors however, the RAM memory of the processors is retained by a Lithium battery with lifespan of Two (2) years.
The 1747-M2 is especially designed to allow burning of user program with the use of a PROM programmer or RSLogix 500 programming software.
When installing or removing this module, make sure that the power to the controller has already been turned off to prevent damaging the module or experiencing undesired processor faults. It is important that you hold it by the end of the carrier or the edges of the plastic housing because dirt and the skin oil is corrosive and may affect the metallic parts of the module. Also avoid subjecting the 1747-M2 module to areas with possible electrostatic charge, as this charge can alter or even destroy the memory.
Technical Description of 1747-M2